The Small Craft Motion Program (SCraMP) displays the devices accelerometer, gyroscope, and location data. A collection of motion warning indices are implemented for boating operations. Use of this program does not replace good judgment Safe boat operation is the Captains responsibility.

SCraMP alternatives

Bubble level and Clinometer

In this the limited but therefore free version of Clinometer. It as all features but can not be calibrated. Check out all our products (free and paid) on www.plaincode.com

  • size 17.2 MB

SignalScope

SignalScope turns your iOS device into a powerful real-time spectrum analyzer and oscilloscope. Easily measure audible frequencies in SignalScopes FFT analyzer. Includes support for additional engineering units (V, A, m/s^2, m/s, g, ips), which are assignable to audio input channels.

  • size 9.5 MB

Bad Elf GPS

This utility app allows owners of any Bad Elf GPS accessory to check the health of the Bad Elf hardware, view the GPS data being received, transfer and view trip logs, and install firmware updates. Visit www.bad-elf.com to learn more about the Bad Elf GPS, GPS Pro/Pro+, and the GNSS Surveyor accessories, which add a high performance GPS receiver to the iPod touch, iPhone, and iPad via the 30-pin dock connector, Lighting connector, or Bluetooth. Note: Continued use of the GPS running in the background can dramatically decrease battery life.

  • size 88.0 MB

SensorLog

With SensorLog you can read out sensor data of your iOS device and save it as csv file, stream sensor data via tcp/ip, or send sensor data as HTTP GET/POST request. SensorLog also supports logging, streaming, and sending while it is running in background. Sensor data of your iOS device can be sampled with up to 100Hz (depending on the version of your iOS device and fore or background mode, max update rate via HTTP request 1 second).The following data of the iOS framework is provided by SensorLog:- CLLocation: latitude, longitude, altitude, speed, course, verticalAccuracy, horizontalAccuracy, floor- CLHeading: heading.x, heading.y, heading.z, trueHeading, magneticHeading, headingAccuracy- CMAccelerometer: acceleration.x, acceleration.y, acceleration.z- CMGyroData: rotationRate.x, rotationRate.y, rotationRate.z- CMDeviceMotion: yaw, roll, pitch, rotationRate, userAcceleration, attitudeReferenceFrame, quaternions, gravity, magneticField, magneticField.accuracy- AVAudioRecorder: peakPower, averagePower (decibels)iPhone 5S and following:- CMMotionActivity: Activity, activity.startDate, activity.confidence- CMPedometer: numberOfSteps, startDate, distance, endDateiPhone 6 / iPhone 6Plus and following:- CMPedometer: numberOfSteps, startDate, distance, endDate, floorsAscended, floorsDescended - CMAltimeter: relativeAltitude, pressure SensorLog additionally supports:- logging of WIFI and network carrier IP addresses - logging of the device orientation- logging of battery level- tagging of the logged data with numerical values

  • size 3.7 MB

Free42

Free42 is a re-implementation of the HP-42S calculator and the HP-82240 printer. It is a complete rewrite, not using any HP code, and it does not require an HP-42S ROM image. The executables and source code are released under the terms of the GNU General Public License, version 2.All third-party code used in Free42 is either in the public domain, or licensed under terms compatible with GPLv2, or used with the authors permission.

  • size 6.7 MB