NetworkUtilityTools is a handy software package for network related diagnoses, simulation and monitoring tasks. Package includes:-Ping Tool: test the reachability of a host and measure the round-trip time.-Trace Route: display the route and measure transit delays of packets across an network.-UDP Listener: listen on an assigned port, and display captured UDP packets on that port.-UDP broadcaster: broadcast message in UDP packets format to desired IP address and port.-TCP Server: a simple TCP-Echo-Server, repeats any received TCP packets back to the client that sent them.-TCP Client: simulates a TCP client, send message in TCP packet to a designate server.-UPnP Checker: tests if your router is UPnP enabled and if a particular port is port forwardable. Notify the status change and display the overall test statistics.-Whats My IP: displays the pubic IP of your device-Port Scanner: scans for open port within a given IP range


Similar Apps

Cmd Remote - A Simple TCP UDP Client & Server
UDP / TCP / Rest Network Test Utility
TCP Console
TCP-UDP Client
Net Ping
TCP Terminal

Network Utility Tools alternatives

Ping Monitor - Network & Server Status Check

You should never let your important servers, websites and APIs out of sight. And this is the perfect app to keep an eye on them while on the go. The background pattern was provided by

  • size 13.0 MB

Network Tools - Ping, Traceroute, Scan Network

Network Tools by KeepSolid a smart solution for fast and accurate network analysis, server availability check and network censorship test. If you need to check your network settings, test server availability, or scan WiFi networks for neighbor devices, Network Tools has been developed right for you Our professional app is equipped with a wide range of tools like ping, traceroute, DNS resolve, simple TCP client, routes, and interfaces list. The variety of expert analysis tools includes:Server Check and Censorship Test- Add any custom domain for HTTP(S) availability check- Gives additional information on whether domain name cant be resolved or does not answer via HTTP protocol- Shows your extensive information about blocked websites and access timesWiFi Devices List- Shows a list of all WiFi neighbor devices with their respective IP and MAC addresses- Shows NetBIOS/Bonjour names of devices- Allows ping/traceroute of the found devices to check connectivityPing- Allows you to detect a packet loss and network problems- Configurable timeout, delay, packet size, packet countTraceroute- Shows the full route from your device to the destination server- Gives you all the stats on intermediate network hopsDNS Resolve- You can use system configured DNS servers or choose from the list of pre-defined ones- Fast and accurate data with copiable results- Supports both IPv4 (A) and IPv6 (AAAA) field types- Additional advanced field type responses are provided: MX, NS, SOA, SRV, TXTTCP Client- Connect to any plain-text that supports a TCP server- Supports HTTP, SMTP, POP3, Telnet protocols- Good for students researching network protocolsNetwork Routes- Shows system routes on your device- Similar to route utility from your Mac, especially useful for developersNetwork Interfaces- Shows all system network interfaces along with associated addresses- Similar to ifconfig utility from your Mac.

  • rating 4.78261
  • size 20.0 MB


HTTP Web Server Response Diagnostic Tool - Curl for iPhone and iPadiCurlHTTP is a simple, easy to use app that allows you to run MacOS/Linux-like cURL tests against URLs. It can simulate different web browsers (user-agents) to retrieve the raw HTTP headers and HTML response from web servers. iPhone and iPad support Verbose and Basic Detail HTTP Timing Details (Name Lookup, TCP Connect, SSL Handshake, First Byte and Total) Set custom User-Agent, Host Headers, Timeouts, HTTP Authentication, SSL Mode and POST Data Share Feature to send output to Clipboard, Printer and Email HTTP/2 Support IPv4 and IPv6 DNS Resolution with Option for Manual Address Resolution (via HOST:PORT:ADDRESS)

  • size 5.0 MB

Network Utility

App and Widget were updated for iOS 10 Add to your notification center every available Network Info and Data Usage*. With Network Utility you can quickly find all informations about your network. You can use the Dig tool for querying Domain Name System (DNS) servers.DATA USAGE PLANSDailyWeeklyMonthly30 days28 days (NEW)AVAILABLE NETWORK INFOInternet- ISP- IP- IPv6- REACHABILITY STATUS- DNS- TOTAL SENT DATA- TOTAL RECEIVED DATAWi-Fi- SSID- BSSID- IP- GATEWAY- MASK- MAC ADDRESS- SENT DATA- RECEIVED DATACellular- CARRIER- RADIO ACCESS TECHNOLOGY- VoIP SUPPORT- SENT DATA- RECEIVED DATAPING OPTIONS- IPv4/IPv6- COUNT- WAIT- TIMEOUT- PACKET SIZE

  • rating 5.0
  • size 27.6 MB

Hosts Monitor: Ping, Ports and URLs Monitor

Hosts Monitor is the perfect and essential network utility to help you to keep an eye on your favorite network device, servers, websites on the go. It provides frequently used tools such as Ping, URLs Monitor and Ports Scanner. It works when the app is in background, however it depends on various things, battery life, network availability, app usage and more.

  • size 20.1 MB

More Information About alternatives

Cmd Remote - A Simple TCP UDP Client & Server

The Cmd app is a simple yet powerful tool which allows you to operate your electronic devices over home WiFi network. The app can act as a remote controller or a simple TCP/UDP client/server. Listen on specific port for incoming packets with TCP/UDP server modeCmd app is the ideal tool for network developers and electronics enthusiasts.

  • size 16.8 MB
  • version 2.1.5

UDP / TCP / Rest Network Test Utility

A network utility app that supports three (3) modes of operation (TCP, UDP, REST) :1) UDP ModeAllows you to send UDP datagrams to another client (perhaps to another instance of this application running on another iPhone) or allows you to just listen for UDP packets. Also, allows you to specify the local port to bind to.2) TCP ModeTCP Mode supports two (2) submodes: 1) TCP Client and TCP Server. In all cases, the output can be formatted in RAW or JSON.

  • size 24.1 MB
  • version 1.0

TCP Console

You need to test your TCP/IP server or client? View incoming or outgoing text strings?TCP Console is the app for you With a couple of taps could start a server TCP/IP listening on the port you want*, send text string or EOL characters and display the responses received. This feature requires you to download the app Utility Network, free on App Store.

  • size 3.3 MB
  • version 2.0.1

TCP-UDP Client

TCP-UDP Client is an iPhone and iPod Touch application that allows you to control a server based on a TCP or UDP communication, whenever and wherever you want. During the device configuration, you just have to insert the server IP address and the port number where the connection will be established. At this point you can send any command you want.

  • size 2.0 MB
  • version 1.0


KnockOnD is a simple port knocking client compatible with knockd or any other port knocking server. It supports both UDP and TCP protocols, interpacket delays. Once saved these sequences are easily accessible for knocking.

  • size 0.6 MB
  • version 1.5


This app is a tool for socket debug, support TCP Server/TCP Client/UDP Server/UDP Client and UDP broadcast support send and receive in ascii mode or HEX mode, and support auto send in ms.test video available url:

  • size 1.4 MB
  • version 1.0.0


A simple and fast client for Mqtt, the internet of things protocolIt can be use for test your Broker server , check if the broker its online, check your topics. You can send messages and read messages from a topic, you can set user, password, client id, topic, port and server ip. Dont insert in HOST tcp:// only host name or ip

  • size 0.7 MB
  • version 2.3


How secure is your network? Find out with NetDetective In addition to essential tools for the networking professional (including Trace Route, WhoIs, and Ping) NetDetective gives users the ability to audit intranet connectivity. Find out now with NetDetective FEATURES in 1.0 * Easy to use interface * Intranet port scanning * Internet port scanning * Computer name scanning * UDP open port detection * TCP open port detection * UPnP services detection * MAC address detection * Hardware manufacturer identification * Trace Route utility * WhoIs identification utility * Continuous Ping scan utility * Options to enable and disable specific scanning functionality

  • rating 3.66667
  • size 0.7 MB
  • version 1.1

Net Ping

Ping a servers domain or IP address to get the latency and see if the connection is dropping any packets. Turn on continuous ping to test when a server starts responding. Net Ping reports Packet latency* Number of packets sent and received* Get the IP address of a website, as reported by DNS

  • size 5.9 MB
  • version 1.1.1

TCP Terminal

TCP Terminal application is a developer tool for connecting to an ip address. With this app you can connact to an ip adress and port as a TCP client. It is usefull for electronic developers; they can test their TCP devices with this application.

  • size 29.7 MB
  • version 1.0.1