MDVR!

NetcamViewer Mobile is an advanced application for viewing, controlling and managing both small and large collections of network cameras. NetcamViewer Mobile supports a large variety of IP cameras. Please contact us if the manufacturer of your camera is listed but the camera is not supported

• size 2.4 MB

Control & View your Techpro Security Products DVR,NVR and IP cameras remotely using your Apple device. This free application will allow you to:- View live video on multiple cameras, DVRs, NVRs, and IP cameras at the same time.- Play Back Recorded Video on your phone.- Control your PTZ cameras from your Apple device.- Listen to live audio and perform 2 way conversations (if the DVR is connected to a powered speaker)- Create favorite groups of cameras which can be from multiple devices at once.- Take snap shots of video and save on your device.- There is a built in Manual. This new application takes advantage of new features found in the most recent firmwares.

• size 41.3 MB

TMEye+ allows iPhone users to view and control live video streams from cameras and video encoders. Features: iPhone and iPod Touch compatible. Ability to change ip address and port as desired for internal and remote [email protected]

• size 39.2 MB

Please kindly recognize that the so called vMEyeHD,ASeePro,ASeeProHD MEyeProV3 and MEyeProV4 are not our products. They are fake and of poor quality, please do not watse your money on them. Support address book.

• size 39.9 MB

KMEye allows iPhone users to view and control live video streams from cameras and video encoders. Features: iPhone and iPod Touch compatible. The Email: [email protected]

• size 38.8 MB

The OpenEye MDVR HD allows you to view live video remotely from any OpenEye E-Series, N-Series, H-Series, or X-Series recorder using your iPad. Connect over 3G/4G/LTE or WiFi network to your Commercial or Professional grade recorder for mobile surveillance and situational awareness. KNOWN ISSUES: May disconnect when used on recorders running Server version below 4.50.4204.PRODUCT SUPPORT: OE3 E-Series Rev A (Firmware v2.0.0.5+) OE3 E-Series Rev B (Firmware v3.0.0.6+) OE-EMAX/OE-ESLIM (Firmware v1.3.3.7+) X-Series Recorders (Server v4.50.4204+) N-Series Recorders (Server v4.50.4204+) H-Series Recorders (Server v4.50.4204+) Xr-Series Recorders (Server v4.50.4204+)FEATURES: Live Video (Single and Multiplex) Megapixel camera support (When using Server v4.50.4204+) Basic Search (When using Server v4.50.4204+) PTZ Control (Directional, Zoom and Preset modes) Alarm Relay Control Screen Capture Digital Zoom in Single/Full Screen for Live and SearchFOR MORE INFORMATION:visit http://openeye.net

• size 4.7 MB

• version 2.38

The Surveillix HD iPad application allows you to seamlessly view live video from any EHV, EAV, DVS, NVS, HVS, IPS, or XVS using your iPad. Connect to your Surveillix DVR for remote surveillance and real-time monitoring. FEATURES:Live View (Single, Quad, 9, and 16 screen views)PTZ controlSearchSupport for megapixel cameras (for Server v4.50+)SnapshotKNOWN ISSUES:- Search may cause the application to disconnect when using Server versions below 4.00.57.- IK-WP41A PTZ support is not available for iPhone, iPad or Mac appsPRODUCT SUPPORT:EHV Series Recorder (Firmware v2.0.0.5+)EHV D1 Series Recorder (Firmware v1.0.0.9+)EAV Series Recorder (Firmware v1.3.3.7+)DVS Series Recorder (Server v4.50+)NVS Series Recorder (Server v4.50+)HVS Series Recorder (Server v4.50+)IPS Series Recorder (Server v4.50+)XVS Series Recorder (Server v4.50+)

• rating 2

• size 5.0 MB

• version 2.45

The Surveillix mobile application allows you to seamlessly view live video from any EHV, EAV, DVS, NVS, HVS, IPS, or XVS using your iPhone, iPad or iPod Touch. Connect to your Surveillix DVR for remote surveillance and real-time monitoring. FEATURES:Live ViewPTZ controlSearchSupport for megapixel cameras (for Server v4.50.19+)KNOWN ISSUES:- Search may cause the application to freeze when using Server versions below 4.00.57.- IK-WP41A PTZ support is not available for iPhone, iPad or Mac appsPRODUCT SUPPORT:EHV Series Recorder (Firmware v2.0.0.5+)EHV D1 Series Recorder (Firmware v1.0.0.9+)EAV Series Recorder (Firmware v1.3.3.7+)DVS Series Recorder (Server v4.50+)NVS Series Recorder (Server v4.50+)HVS Series Recorder (Server v4.50+)IPS Series Recorder (Server v4.50+)XVS Series Recorder (Server v4.50+)

• size 6.3 MB

• version 3.25

The Honeywell HRDP-Fusion application will allow users to connect to their Fusion or HRDP H.264 to view live video, search recorded video and control PTZ cameras from the simple interface of the iPhone or iPod Touch. Supported Products: HRDP Rev A (v1.0.1.86 and later)HRDP Rev B (v1.0.0.49 and later) HRDPX (v1.0.0.36 and later)HRDPH (v3.0.1.10 and later)HRDPHX (v1.0.0.14 and later) Fusion 4 Rev A and B (v4.50.10808 and later) Included Features: Live and Search video monitoring PTZ Controls (Directional, Zoom and Preset modes)Megapixel IP camera supportMultiple channel views (1 or 4)Digital Zoom for Live and Search

• size 7.0 MB

• version 3.24

The Honeywell HRDP-Fusion HD application will allow users to connect to their Fusion or HRDP H.264 to view live video, search recorded video and control PTZ cameras from the simple interface of the iPad. Supported Products: HRDP Rev A (v1.0.1.86 and later)HRDP Rev B (v1.0.0.49 and later) HRDPX (v1.0.0.36 and later)HRDPH (v3.0.1.10 and later)HRDPHX (v1.0.0.14 and later) Fusion 4 Rev A and B (v4.50.10808 and later) Included Features: Live and Search video monitoring PTZ Controls (Directional, Zoom and Preset modes)Megapixel IP camera supportMultiple channel views (1, 4, 9, and 16)SnapshotsRelay activation/deactivation Digital Zoom for Live and Search

• size 5.4 MB

• version 2.20

March Networks Command Mobile allows you to view live and recorded video from cameras connected to a March Networks recorder using your mobile device. You can connect to cameras through your CES servers or through your recorders. Supported recording devices include: - 8000 Series Hybrid NVR software version 5.8.5 and higher - 9000 Series IP recorder software version 5.9.0 and higher - RideSafe GT Series Hybrid NVR software version 5.8.5 and higher - Command Recording Server (CRS) version 2.1.1 and higher - Command Enterprise Server (CES) version 2.2 and higher

• size 67.0 MB

• version 1.0.1

Mobile-EMS for iPhone is an application that can view the images from Panasonic E-Series Network Camera, Network Disk Recorder (K-NL304K, K-NL308K, K-NL316K). By connecting a terminal to a 3G/4G or wireless LAN (Wi-Fi), it is possible to view live images from the network camera and recorded images stored on recorders.

• size 48.2 MB

• version 3.42.000

Mobile-EMS for iPad is an application that can view the images from Panasonic E-Series Network Camera, Network Disk Recorder (K-NL304K, K-NL308K, K-NL316K). By connecting a terminal to a 3G/4G or wireless LAN (Wi-Fi), it is possible to view live images from the network camera and recorded images stored on recorders.

• size 46.2 MB

• version 3.31.002

View and search video from your Percept recorders on your mobile device with ease. PRODUCT SUPPORT: Percept recordersFEATURES: Universal single sign-on loads all recorder connection settings automatically Display video in a single or quad view window Switch between cameras by swiping a finger Search video by time and date or by event type Digital Zoom for Live and Search PTZ controls for supported cameras

• size 16.6 MB

• version 1.3.1

ZAVIO CamGraba Mobile Client v2.2.0 is a free app specially built for iPhone devices that allows you to remotely monitor live video from ZAVIO IP cameras through ZAVIO CamGraba NVR surveillance software. Users can view multiple cameras simultaneously by 3G or WiFi. Up to 32-CH total of live view display at QCIF resolution Single CH live view display at CIF resolution Support snapshots Support Physical / Digital PTZ control Preset point support Support Digital IO ZAVIO CamGraba Mobile Client is workable as the CamGraba NVR software is open New Function: 1.Up to 64 CH total of live view display at QCIF resolution 2.Can setup multiple servers (Single server connection) 3.Single channel live view display at CIF resolution 4.Support Snapshots 5.Support Physical / Digital PTZ control (Depends on camera) 6.Preset point support (Depends on camera) 7.Digital Input/Output support 8.Support Audio 9.Support Megapixel 10.Support 1ch PlaybackSupported Systems Supported OS: -iPhone 3GS and above version -iPad/iPad2/the new iPad Supported Video codec -MJPEG -MPEG4 -H.264

• size 7.4 MB

• version 2.2