Elm327 WiFi Check Version!

UltraGauge Blue is a one-stop end-to-end OBDII (OBD2) Automotive Information Center and Scan Tool. Requires UltraGauge Blue Adapter and this App In short, UltraGauge Blue can:- Display 100s of OBD2 Gauges- Display Check Engine Light and Trouble Codes- Clear Check Engine Light- Provide alarms on conditions like Check Engine Light/Trouble Codes, time to change oil, over temperature, and much more- Connect to any OBD2 compliant vehicle. Solution requires UltraGauge Application (this App), UltraGauge Blue Bluetooth Hardware Adapter (order online from www.ultra-gauge.com), and your OBDII compliant vehicle.

• size 9.4 MB

FourStroke is a powerful tool that analyzes and displays real-time vehicle sensors and data through your vehicles OBD-II port, a port standard on most vehicles across the world. Use of this app requires a compatible OBD-II Wifi Adapter. Please visit our website for details.

• rating 3.82353

• size 13.7 MB

See what your car is doing in realtime, get OBD fault codes, car performance, sensor data and more Car Scanner is a vehicle / car performance / diagnostics tool and scanner that uses an OBD II Wi-Fi or Bluetooth 4.0 (Bluetooth LE) adapter to connect to your OBD2 engine management / ECU.Car Scanner gives you a bunch of unique features:1) Layout your own dashboard with the gauges and charts you want 2) Add custom (extended PIDs) and get information, that was hidden from you by car manufacturer 3) It can also show and reset a DTC fault code like a scantool. Car Scanner includes a huge database of DTC codes descriptions.4) Car Scanner allows you to read free-frames (sensors state when DTC is saved).5) Now with Mode 06 - you can get ECU self-monitoring test results. Of course, original genuine ELM327 of any version is supported.

• rating 4.7

• size 93.3 MB

OBD Auto Doctor is the advanced OBD2 car diagnostics tool in your pocket Ever wonder why the check engine light or MIL keeps going on? Check and reset the trouble codes with OBD Auto Doctor. Visit the OBD Auto Doctor website for more information:https://www.obdautodoctor.com/If you enjoy using OBD Auto Doctor, please take a minute to leave a good review: it really helps.

• size 12.7 MB

Carista is a mobile app which empowers you to seamlessly diagnose, customize, and service your car. Just plug in your OBD2 adapter, launch the app, and save time and money on dealers and mechanics. RC-F)ES (2007+)GS (2013+)LS (2007+)RX (2010+)GX (2010+)LX (2009+)NX, CT, HS, LFA (all)Toyota:86 / GT86 / FT864Runner (2010+)Auris (2007+)Avalon (2013+)Avensis (2009+: T27)Camry (2007+)Corolla (2013+)Highlander (2008+)Land Cruiser (2008+)Matrix (2009+)Prius (2010+)Rav4 (2006+)Sequoia (2008+)Sienna (2011+)Tacoma (2016+)Tundra (2007+)Venza (all)Yaris (2006+)Volkswagen:Beetle (2012+)Caddy (2004+)Golf/GTI, Jetta, Eos, Scirocco Mk5, Mk6, Mk7 (2005+)Passat, CC (2006+)Phaeton (2007+)Polo Mk5 6R/6C (2010+)Sharan 2011+Tiguan (2007-2016)Touareg (2010-2015)Touran (2003-2015)Transporter T5, T6 (2010+)Audi:A1A3 (8P, 8V: 2004+)A4 (B8: 2008-2015)A5A6 (C6, C7: 2005+)A7A8 (D3, D4: 2004+)Q3, Q5Q7 (2007-2015)TT (2007-2014)Scion, Subaru, SEAT & Skoda: see website

• rating 4.83333

• size 21.4 MB

Application check protocols OBD in car. Connect to ELM327 device. Supports ALL protocols:- CAN ISO 15765 - SAE J1850 PWM- ISO 14230 KWP2000- ISO 9141-2- SAE J1850 VPWSupports ALL version ELM327, and check version your devices.

• size 15.3 MB

• version 1.0

Simple application to connect your car. App connect to device ELM327 and scan car command. Devices of this company perfectly with the application.

• rating 2.71429

• size 15.1 MB

• version 1.1

Automobiles produced today are required to interface to diagnostic test equipment. OBDAnalysis is designed to function as a diagnostic tool capable of communicating certain vehicle malfunctions to the user. *Wireless WiFi OBD-II ELM327 units are commonly available through multiple vendors on the internet.

This app turns your iPhone,iPad or iPod into an advanced car diagnostic tool. Want to know why the check engine light keeps going on? - Shows in real time detected sensors data.- Trip computer- Full support for OBD-II diagnostics, find out why your check-engine light is on and clear diagnostic trouble codes (DTCs)Current version tested on next vehicles:- Subaru Forester 2010- LandRover Discovery 2011 (Diesel)- Porsche cayenne 2012- Peugeot 308 2012- Skoda Yeti 2011- Mazda 2/3

• size 10.6 MB

• version 2.2

This app turns your iPhone,iPad or iPod into an advanced gauges for your car. Want to monitor speed, fuel consumption, RPM, engine temperature as you drive? Please verify that your vehicle is OBD-II/EOBD compliant before purchasing OBD-II Hardware compatibility:- ELM327 compatible WiFi (OBDLink Wifi, PLX Kiwi Wifi, OBDKey WLAN) Bluetooth NOT supportedGet the benefit of multiple gauges without the overwhelming clutter and the expense (Note: Not all OBD-II compliant vehicles will have support for all of these parameters)Main features:Gauges:- engine speed (RPM)- vehicle speed- real time fuel consumption- fuel level %- engine coolant temp.- intake air temp.- percent engine load

• size 9.9 MB

• version 1.5

FORScan Lite application was developed specially for a computer diagnostics of Ford, Mazda, Lincoln and Mercury vehicles. Requirements:- ELM327 WiFi or other ELM327 compatible WiFi adapter, or Kiwi 3 Bluetooth Low Energy- Vehicles other than Ford, Mazda, Lincoln, Mercury are not supportedFeatures:- Analyzing an on-board network configuration of the connected vehicle- Read and reset DTC for all modules- Read sensors and other data (PIDs) from all modulesAttention: tests, service and configuration and programming functions are not available in FORScan Lite.

• size 58.3 MB

• version 1.3.11

Make a diagnostic of your car using your iPhone/iPad and discover why your check engine light is lit you no longer need to use the manufacturers pack Connect an ELM327 device to the OBD2 port in your car and run the application: you will be able to diagnose your car, clear the malfunction indicator light and view your vehicle data in real time. Functions: - View engine and gearbox fault codes (also known as DTCs) and display their meaning in English (more than 11 000 definitions available) - Clear your malfunction indicator light - Display specific manufacturer error codes for the following makes: Renault, Peugeot, Citron, Opel, BMW, Ford, Audi, Volkswagen, Skoda, Fiat, Alfa Romeo - Real-time display of vehicle sensors and saving possible in a file. - Create recordings of your journeys on your iPhone/iPad and read them back later using our PC/Mac software EOBD-Facile - Create recordings including GPS data in .kml format Note: Our application requires a compatible ELM327 WiFi interface or a klavkarr scanner as offered on our website: https://www.boutiqueobdfacile.fr/klavkarr-110-obd2-usb-bluetooth-b636.html A video presentation of the application is available here: https://youtu.be/pvzcJt2OmQs For more information about our application and OBD consult our website: https://www.outilsobdfacile.com To check whether your vehicle is compatible with the E OBD/OBD2 standard, see our list of compatible vehicles: https://www.outilsobdfacile.com/vehicle-list-compatible-obd2.php

• rating 3.4

• size 49.2 MB

• version 2.09

This app that allows you to interface directly with an ELM327 based OBD adapter over WiFi or BLE. The IP address/port and BLE ID are configurable. This app requires ELM327 based hardware to interface with the OBD2 port of a vehicle.

• size 22.1 MB

• version 1.1.4

Car Wifi Camera wifiwifi wifiioswifiIOSCar reverse image. This software is connected to the rear of the car WiFi camera with WiFi, when you start the car, brakes, WiFi camera to the rear of the car to start, your IOS device can be connected to the WiFi camera, and when you hang into the automobile reverse gear, your IOS device can display the real-time video.

• size 13.6 MB

• version 1.0

KonnweiLink is an App for you car, MAKE YOUR DRIVING SAFER, EASIER & LESS EXPENSIVEIts an OBD App which could connect with ELM327 to monitoring your Car ECU changes. Such as the RPM, Speed, etc.

• size 65.5 MB

• version 1.0