UltraGauge Blue is a one-stop end-to-end OBDII (OBD2) Automotive Information Center and Scan Tool. Requires UltraGauge Blue Adapter and this App In short, UltraGauge Blue can:- Display 100s of OBD2 Gauges- Display Check Engine Light and Trouble Codes- Clear Check Engine Light- Provide alarms on conditions like Check Engine Light/Trouble Codes, time to change oil, over temperature, and much more- Connect to any OBD2 compliant vehicle. Solution requires UltraGauge Application (this App), UltraGauge Blue Bluetooth Hardware Adapter (order online from www.ultra-gauge.com), and your OBDII compliant vehicle.


Similar Apps

RepairSolutions Pro
OBD Gauges
EOBD Facile - Car Diagnostics
ELM327 Terminal
Engine Link -OBD II vehicle monitoring & diagnosis

UltraGauge alternatives

OBD Auto Doctor

OBD Auto Doctor is the advanced OBD2 car diagnostics tool in your pocket Ever wonder why the check engine light or MIL keeps going on? Check and reset the trouble codes with OBD Auto Doctor. Visit the OBD Auto Doctor website for more information:https://www.obdautodoctor.com/If you enjoy using OBD Auto Doctor, please take a minute to leave a good review: it really helps.

  • size 12.7 MB

iQuad by Quadzilla

The iQuad app was designed to be used specifically with Quadzilla Adrenaline Performance Modules. iQuad gives you all of the features previously only available with proprietary displays. See how easy it is to change vehicles and we know you will agree that this is the greatest advancement in vehicle performance in a long time

  • size 9.3 MB

Carista OBD2

Carista is a mobile app which empowers you to seamlessly diagnose, customize, and service your car. Just plug in your OBD2 adapter, launch the app, and save time and money on dealers and mechanics. RC-F)ES (2007+)GS (2013+)LS (2007+)RX (2010+)GX (2010+)LX (2009+)NX, CT, HS, LFA (all)Toyota:86 / GT86 / FT864Runner (2010+)Auris (2007+)Avalon (2013+)Avensis (2009+: T27)Camry (2007+)Corolla (2013+)Highlander (2008+)Land Cruiser (2008+)Matrix (2009+)Prius (2010+)Rav4 (2006+)Sequoia (2008+)Sienna (2011+)Tacoma (2016+)Tundra (2007+)Venza (all)Yaris (2006+)Volkswagen:Beetle (2012+)Caddy (2004+)Golf/GTI, Jetta, Eos, Scirocco Mk5, Mk6, Mk7 (2005+)Passat, CC (2006+)Phaeton (2007+)Polo Mk5 6R/6C (2010+)Sharan 2011+Tiguan (2007-2016)Touareg (2010-2015)Touran (2003-2015)Transporter T5, T6 (2010+)Audi:A1A3 (8P, 8V: 2004+)A4 (B8: 2008-2015)A5A6 (C6, C7: 2005+)A7A8 (D3, D4: 2004+)Q3, Q5Q7 (2007-2015)TT (2007-2014)Scion, Subaru, SEAT & Skoda: see website

  • rating 4.83333
  • size 21.4 MB


The perfect vehicle companion app for road trips, street and race track. * Super high quality visuals and animated gauges. Have Fun

  • size 18.0 MB


FourStroke is a powerful tool that analyzes and displays real-time vehicle sensors and data through your vehicles OBD-II port, a port standard on most vehicles across the world. Use of this app requires a compatible OBD-II Wifi Adapter. Please visit our website for details.

  • rating 3.82353
  • size 13.7 MB

More Information About alternatives

RepairSolutions Pro

The RepairSolutions Pro application provides quick and easy to understand vehicle repair information for powertrain diagnostic trouble codes. Features: Scan vehicle for trouble diagnostic codes Read Check Engine Light Trouble Codes View Freeze Frame Diagnostic Data Quickly check Smog Emission Readiness status View complete and incomplete Emissions System Monitors Diagnostic Trouble Code (DTC) definition library Data Link Connector (DLC) locator View diagnostic reports online Supports Bluetooth enabled hand-held tools Verified Fixes for MIL DTCs Repair Difficulty Ratings*An Innova Bluetooth capable tool is required for connectivity to the vehicle and in-app features. Please visit pro.innova.com for more product information.

  • size 21.0 MB
  • version 1.0.0

OBD Gauges

This app turns your iPhone,iPad or iPod into an advanced gauges for your car. Want to monitor speed, fuel consumption, RPM, engine temperature as you drive? Please verify that your vehicle is OBD-II/EOBD compliant before purchasing OBD-II Hardware compatibility:- ELM327 compatible WiFi (OBDLink Wifi, PLX Kiwi Wifi, OBDKey WLAN) Bluetooth NOT supportedGet the benefit of multiple gauges without the overwhelming clutter and the expense (Note: Not all OBD-II compliant vehicles will have support for all of these parameters)Main features:Gauges:- engine speed (RPM)- vehicle speed- real time fuel consumption- fuel level %- engine coolant temp.- intake air temp.- percent engine load

  • size 9.9 MB
  • version 1.5


AutoPro is an app for your iPhone to monitor your car health. AutoPro requires iOS 6.0 or above. Please verify that your car is OBD2 compliant (all cars sold in USA after 1996 should be OK).Main features*:DashBoard:- Engine load- Engine coolant temperature- Short term fuel trim-Long term fuel trim- Engine RPM- Vehicle speed- Mass air flow rate- Fuel level- Barometric pressure- Ambient air temperature- Engine fuel rate- Engine torqueCar Health:- Battery voltage- DTC: Read DTC (diagnostic trouble codes)- Emission test: make sure if your car will pass or fail an emission test- Fuel Usage: mpg, gas usage, cost, etc- O2 sensor: exhaust gas is lean or richAdditional Functions:- Multiple car support- Check locations around you: garage, gas station, hotel, restaurant, etc, and get direction

  • size 7.8 MB
  • version 1.0


The AutoLink100 provides easy access to vehicle diagnostics using smart phone or pad when paired to the available AL100 vehicle adapter. It supports all 10 modes of OBD II test for a complete and fast diagnosis at NO charge, in addition with thousands of troubleshooter code tips, which is truly time-saving and ideal for DIYers and professional technicians. Works on ALL 1996 and newer vehicle (OBDII&CAN) domestic and importQuick State Emissions readiness check and drive cycle verificationEasily determines the cause of the Check Engine Light (MIL)Retrieves generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and pending codesTurns off Check Engine Light (MIL), clears codes and resets monitorsEnhanced OBDII Mode 6 On-board Monitoring Test Results for Specific Monitored SystemsViews freeze frame dataReads and graphs live PCM DataStreamTroubleshooter code tips guide technicians to the root cause of trouble code faster, saving diagnosis and repair timeRetrieves vehicle information (VIN,CIN and CVN)InformationDeveloper Autel Intelligent Technology Co., Ltd.

  • size 16.1 MB
  • version 1.02.01


Is your vehicle ready for emissions inspection?Check engine light on?Use the ReadyLINK by GoPoint Technology with your GL1 cable to prepare your vehicle for inspection. Decodes whether all of your vehicle monitors have been completed and helps you diagnose check engine light trouble codes. Know before you go

  • rating 1.66667
  • size 0.6 MB
  • version 1.1


Read/Reset the Diagnostic Trouble Codes(DTC) and the clear Check Engine Light, Readiness flags are also available for your emission test. Sampling/logging with real-time charts and gauges. Export and Email logs to CSV/TXTIt works with WiFi ELM32x-based interfaces

  • size 8.8 MB
  • version 1.96

EOBD Facile - Car Diagnostics

Make a diagnostic of your car using your iPhone/iPad and discover why your check engine light is lit you no longer need to use the manufacturers pack Connect an ELM327 device to the OBD2 port in your car and run the application: you will be able to diagnose your car, clear the malfunction indicator light and view your vehicle data in real time. Functions: - View engine and gearbox fault codes (also known as DTCs) and display their meaning in English (more than 11 000 definitions available) - Clear your malfunction indicator light - Display specific manufacturer error codes for the following makes: Renault, Peugeot, Citron, Opel, BMW, Ford, Audi, Volkswagen, Skoda, Fiat, Alfa Romeo - Real-time display of vehicle sensors and saving possible in a file. - Create recordings of your journeys on your iPhone/iPad and read them back later using our PC/Mac software EOBD-Facile - Create recordings including GPS data in .kml format Note: Our application requires a compatible ELM327 WiFi interface or a klavkarr scanner as offered on our website: https://www.boutiqueobdfacile.fr/klavkarr-110-obd2-usb-bluetooth-b636.html A video presentation of the application is available here: https://youtu.be/pvzcJt2OmQs For more information about our application and OBD consult our website: https://www.outilsobdfacile.com To check whether your vehicle is compatible with the E OBD/OBD2 standard, see our list of compatible vehicles: https://www.outilsobdfacile.com/vehicle-list-compatible-obd2.php

  • rating 3.4
  • size 49.2 MB
  • version 2.09


OBD2/CAN scanner and Data logger. Read/Reset Check Engine Light(CEL) and DTC codes. It works with WiFi ELM-32x based interfaces

  • size 6.1 MB
  • version 1.96

ELM327 Terminal

This app that allows you to interface directly with an ELM327 based OBD adapter over WiFi or BLE. The IP address/port and BLE ID are configurable. This app requires ELM327 based hardware to interface with the OBD2 port of a vehicle.

  • size 22.1 MB
  • version 1.1.4

Engine Link -OBD II vehicle monitoring & diagnosis

EngineLink will turn your iPhone/iPod into vehicle / car performance / diagnostics tool and scanner that uses an OBD II WIFI adapter or a low Energy Bluetooth adapter (LELink, Carista, Viecar) to connect to your OBD2 engine management / ECU.The only iPhone app does custom PID, now supports Torque custom PID file. BENEFITS:* Emission Test. We will answer.

  • rating 2
  • size 10.0 MB
  • version 6.5