iCMS Security!

Please kindly recognize that the so called vMEyeHD,ASeePro,ASeeProHD MEyeProV3 and MEyeProV4 are not our products. They are fake and of poor quality, please do not watse your money on them. Support address book.

• size 39.9 MB

NetcamViewer Mobile is an advanced application for viewing, controlling and managing both small and large collections of network cameras. NetcamViewer Mobile supports a large variety of IP cameras. Please contact us if the manufacturer of your camera is listed but the camera is not supported

• size 2.4 MB

TMEye+ allows iPhone users to view and control live video streams from cameras and video encoders. Features: iPhone and iPod Touch compatible. Ability to change ip address and port as desired for internal and remote [email protected]

• size 39.2 MB

HDIVS is a P2P way to view IPC and DVR,Plug and Play from all over the world Using both IP address and the device GID to get the connecting info from the server. HDIVS can help you view and control the cameras by: 1 live view 2 PTZ 3 Snapshot and record video 4 talk-back

• size 17.0 MB

IMSeye allows iPhone users to view and control live video streams from cameras and video encoders. Features: iPhone and iPod Touch compatible. Ability to change ip address and port as desired for internal and remote users.

• size 38.1 MB

iPH integrates multi-features arm, disarm, inquiry, remote control etc in one, it is compatible with all of the Patrol Hawks GSM alarm systems. Definitely, iPH realized Security at your fingertips Main features 1. Arm, disarm, inquiry, remote control, ect.

• size 3.7 MB

• version 1.1

iPSD integrates multi-features arm, disarm, inquiry, remote control etc in one, it is compatible with all of the Patrol Hawks GSM alarm systems. Definitely, iPSD realized Security at your fingertipsMain features 1. Arm, disarm, inquiry, remote control, ect.

• size 2.4 MB

• version 1.01

GM02 Control is an app integrated with multi-features as arm, disarm, inquiry, remote control, etc. Compatible with GM02 GSM alarm system from CONCOX.Main features: Thin & faddish design Easy to operate Inquire operational log Monitor multiple alarms simultaneouslyProgram parameters remotely Arm, disarm, inquiry, remote control, etc. Secure password management

• size 2.4 MB

• version 1.0

Remote control and access your security systems via Direct Wireless to Arm/Disarm the system, review history and even access your systems manual all from one application

• size 17.6 MB

• version 9.8

S-HOME is a multi app, it can support more than three products at the same time,with the following functions.1.Security functions: such as set arm, disarm, SOS, video monitoring, SMS alarm, Tel alarm etc;2.Household appliances: such as remote control intelligent socket;3.Support product model: WS1N, WP1, WM2GR,WM3GR, WM2FX,WM3FX,WM2B,WM2BX

• size 79.0 MB

• version 1.1.6

Micron Control Alarm System ControlMicron Security Products Ltd Micron Control allows authorised local and remote control of multiple internet connected micron alarm systems, enabling any Apple device with a WiFi or 3G/4G connection to become a remote icon control keypad. Micron Control also enables local and remote control of any other brand of alarm system when a micron EC-11 alarm server is installed. Functionality-Connect and control, locally and remotely, multiple micron internet connected IP security systems-Connect and control, locally and remotely, any other brand of alarm configured with microns EC-11 alarm server-Program and save settings for users and installers-Real-time view of alarm system status-Real-time event log and reporting-Report using push notifications, text or email-Full alarm control including arm, disarm and night arm by area-Output control-Panic, Medical, Fire

• size 40.9 MB

• version 2.1

Main Feature: 1: Touch keypad and LCD display 2: 30 Wireless Zone+2 Wired Zones , Each Defense Zones can be set Seperately : every zone attribute, name, bypass, The Switch will be for delay Alarm and Alarm Sound 3: Alarm SMS include alarm zone and sensors name 4: Remote Control The Relay output 12V ( 12V output for arm and disarm) 5: SMS Control The Relay Output 12V 6: Two-way intercom recording memo(When Sensor cannot connect with Main Panel, After 4 hours will inform user by SMS ) 7:SMS Alert: Arm/Disarmed ,Lower Power of The Battery, Power Failture / Recovery, Lower Voltage,Sensor Lower Power,Phone line Disconnect 8:Support Contact ID Protocol (upload Center Including: alarm information, arm/disarm, low power of battery, Power Failture& Recovery, cycle, testing And Sensor Lower Power)9:Arm/Disarm: away arm&home arm (by remote control ,main keyboard, remote phone, SMS and wireless keyboard)10: One-Key-Control funcation: Out Alarm,Home Arm,Remote Arm11: Tamper Alarm funcation There is a button at the back side of the panel, it will make alarm once the button is loosen12: 10-second automatic message recording 13:Support RFID cards to arm&disarm ( 4 piece RFID Card for 4 zones, FRID can arm and disarm also can send message to inform user)14:Support Intelligent door sensor: can remind you the door or window status of open or closed 15:Support Zones Reminder 16:Support User Alarm to Leave Message 17: Support Speed Dail Button 18: Support Speaker&Talking Funcation,listen in or Listen Alarm Leaving-Messager19: Support Alarm relay output Funcation20: Support timely arm & disarm weekly21: Support 1 FRID Switch Output 22: Support IP Camera,Wireless Siren and Wireless Keyboard

• size 22.3 MB

• version 1.4

Carrot Home application can be used on iPad, iPhone and iPod touch. It is optimized application to act as centralized remote control for Home Automation / Smart Home systems via wireless network, within and outside of your home. Features:Air Conditioner controlCurtain controlLight dimmingMonitor, Arm / Disarm security home alarm systemScenarios / ScenesSeamless operation with 3G and/or WifiSound Diffusion / Background MusicSSL securedVideo camera monitoringRequirement:Carrot Home System Hardware installationData Connection (Wi-Fi, GPRS, Edge, 3G)

• size 9.3 MB

• version 2.1

Wolf-Guard from China, since year 1998, for the global security market. Wolf-Guard provide all kinds of DIY home security products. Help you protect your housing M2K specifications:1.3 wired and 99 wireless defense zones; 2.LCD screen with time clock display;Voice prompt for all operations;3 groups of timely arm and disarm; 3.Can store 6 phone numbers: when alarming, system will make alarm call to these numbers automatically;Can store 3 SMS numbers: when alarming, system will send alarming SMS automatically;4.Two relay 12V output switch;5.Tamper alarm function: there is a button at the back side of the panel; it will make alarm once the button is loosen;6.10-second automatic message recording;7.Built-in artificial intelligent digital voice announcer;8.Built-in artificial intelligent English message; 9.Can send SMS to arm/disarm/check alarm record;10.Can set arm and alarm delay time;11.Built-in wireless transmitter for convenient connection to wireless siren;12.Users can make calls by using keypad on main unit, just like a telephone;13.One-key-control function: Out Arm, Home Arm, Remote Arm;14.SOS, fire, gas, door, hall, window, balcony, and boundary places alarm;15.Real-time, delay, 24 hours, bypass defense zones programming function;16.Wireless coding: easy to add additional wireless accessories;17.Remote control Arm, Disarm, Monitor, and Intercom by phone;18.SMS alarm for power failure or recovery;19.Built-in NI-HM rechargeable battery.

• size 1.7 MB

• version 1.0

The S4 IPC APP is a control panel mobile phone app that specially designed for MaxsMart Product, to arm,disarm, the alarm control panel,etc via P2P. S4 IPC APP is one conbimed APP with S4 IPC alarm system and S4 IPC IP camera. It will protect your home better.

• size 51.3 MB

• version 1.3