eBox - Elenos TX Remote Control!

This app shows you the position of satellites. If you are installing or adjusting a satellite dish it shows the direction to point it for your chosen satellite. The satellite position is shown as a red dot over the camera image so you can also check if there are obstructions between you and the satellite.

• size 0.9 MB

mFi is a Machine-to-Machine (Internet of Things) platform from Ubiquiti Networks, Inc. mFi hardware can be managed and monitored from the mFi Controller software and the mFi application. The mFi Controller software allows you to create rules that trigger actions based on data from your mFi sensors. The mFi hardware is compatible with third-party sensors and machines, making the options unlimited

• rating 3.16667

• size 14.4 MB

This is the highly recommended and praised Function Generator App - an amazingly great and powerful tone generator. Enriched with a vast amount of features yet it is extremely intuitive and designed for simplicity. The Function Generator is AMAZINGLY INTUITIVE and SIMPLE AND THESE ARE THE ADVANCED SETTINGS/FEATURES (upgrade to PRO required):=> Extending The Frequency Range=> Extending The Sweep Times=> Changing Min/Max Slider Frequency Ranges => Changing Max Sweep Time Slider Range=> Changing Signal Amplitude=> Enabling Of The Sweep Repeat / Wobble Function=> Frequency Slider Setting to Linear or Logarithmic=> Left/Right Channel Individual Selection=> Permanently Saving Custom Presets=> Saving Of Endless Number Of Audio Configurations=> Phase Out Setting (Phase shift of 180 of the generated signal)=> BPM (Beats per Minute) Feature=> Dual Function Generator=> Background Theme Selection (Light/Dark)

• size 18.9 MB

The UMobile app is a convenient client application for installing Ubiquiti Networks airMAX and edgeMAX devices. It features device discovery, site survey, airMAX device installation using the U-Installer and airGateway Installer, provisioning with configuration templates, antenna alignment, configuration backup and sharing, and offline firmware upgrades. Minimum Firmware Requirements:- airMAX AC devices: version 7.2.0 or higher- airMAX M devices: version 5.6.5 or higher- airGateway: version 1.1.7 or higher- edgeMAX devices: version 1.9.0 or higher- edgePoint devices: version 1.9.0 or higher

• rating 4.0

• size 90.2 MB

ENGLISH DESCRIPTION / ANGLICK POPIS MasterTherm application allows you to monitor and control your MasterTherm heat pump remotely from your iPhone/iPad over the Internet. Major features:- Online remote monitoring of the heat pump operating status and operating data- Remote control of operation mode, function and temperature settings, including domestic hot water preparation and pool water heating- Remote setup of the weather compensation- Remote On/Off switching of the heat pump- Monitoring of all heating circuits operating status and temperature data, including solar collectors and swimming pool heating, Some features may not be available for all heat pump types and installations. Vyaduje iOS verze 5.1.1 nebo vy.

• size 15.3 MB

• version 1.2

Micron Lite Alarm System ControlMicron Security Products LtdMicron Lite enables local and remote access to your Micron native IP security system, enabling any Apple device with a WiFi or 3G connection to become a remote touch keypad. The user interface is simple and intuitive and provides essential alarm function and status at your fingertips anytime, anywhere. Functionality-Connect to a live micron native IP alarm locally and remotely-Program settings for users and installers-Real-time view of system status-Full arm and night arm-Output control-Panic

• size 4.0 MB

• version 1.60

Powerbrick Alarm System Control Powerbrick and Micron Security Products Ltd Powerbrick enables local and remote access to your Powerbrick native IP security and power management system, enabling any Apple device using WiFi or 3G to become a remote touch keypad. The user interface is simple and intuitive and provides essential alarm function and status at your fingertips anytime, anywhere. Functionality -Connect to a live Powerbrick native IP alarm locally and remotely-Visit Cloud to view Powerbrick event history -Program settings for users and installers -Real-time view of system status -Full arm and night arm -Output control -Panic

• size 2.2 MB

• version 1.3

The 1010 TxApp has been designed to give sound recordists using Audios 1010 digital wireless microphone system greater flexibility both on location and in the studio by allowing them to control various settings on the TX1010 transmitter remotely via a Bluetooth connection. What it does:In its current form, the simple interface controls the following parameters: Allows the user to place TX1010 transmitters into standby and wake the unit back up without the need to physically touch the artist or presenter Allows the user to assign a unique name to each transmitter. The app can display a number of transmitters on screen Adjusts the microphone gain remotely Allows selection of the LF cut function

• size 12.4 MB

• version 1.0

VSM Mobile is a free application for iOS terminal of application software VSM - ValueJet Status Monitor for PC of Mutoh printer users. VSM Mobile enables to check the status of MUTOH printer connected to a local-area network, and the remote control will be available from your handheld terminals.- Print Status - Remaining Ink (Remaining Smart/C) - Alert - Printer Status - Firmware Version - Parts LifeThe printer can be operated by remote control using the remote panel function.- Test Print- Cleaning- Check / Change the Settings- Sleep ModeIn order to use via VSM, VSM is required. Copyright (C) 2012-2017 MUTOH Industries Ltd. All Rights Reserved.

• size 8.4 MB

• version 1.2.2

1.4 wired and 99 wireless defense zones,12V output remote control,arm/disarm linkage output and temper function; 2.LCD screen with time clock display;Voice prompt for all operations;3.3 groups of timely arm and disarm;4.Can store 6 phone numbers: when alarming, system will make alarm call to these numbers automatically;5.Can store 3 SMS numbers: when alarming, system will send alarming SMS automatically;6.One programmable 12V relay output;7.10-second automatic message recording;8.Built-in artificial intelligent digital voice announcer and artificial intelligent English message;9.Can send SMS to arm/disarm/check alarm record;Can set arm and alarm delay time;10.Built-in wireless transmitter for convenient connection to wireless siren(customized);11.Users can make calls by using keypad on main unit, just like a telephone;12.One-key-control function: Out Arm, Home Arm, Remote Arm; SOS, fire, gas, door, hall, window, balcony, and boundary places alarm;13.Real-time, delay, 24 hours, bypass defense zones programming function;14.Wireless coding: easy to add additional wireless accessories;15.Remote control Arm, Disarm, Monitor, and Intercom by phone;16.SMS alarm for power failure or recovery;Built-in NI-HM rechargeable battery.

• size 30.8 MB

• version 1.0

Roam the performance space while monitoring key Shure wireless system parameters with ShurePlus Channels. Connect over Wi-Fi to automatically discover and connect to networked, compatible Shure hardware and monitor critical channel information, including RF signal strength, audio levels, and remaining battery life. Compatible Shure Wireless Products Axient Digital Wireless Systems Axient Wireless Management Network PSM1000 Personal Monitor Systems QLX-D Digital Wireless Systems UHF-R Wireless Systems ULX-D Digital Wireless Systems Features Automatically discover and connect to networked Shure systems over Wi-Fi (802.11n or 802.11ac) Quickly switch between any of your wireless channels with sortable channel lists RF level metering Audio level metering Transmitter battery level metering Frequency assignments with band, group, and channel info RF Interference indication (Axient Digital, Axient, ULX-D) Encryption status (Axient Digital, ULX-D, QLX-D) Frequency diversity status (Axient Digital, Axient, ULX-D) ShowLink signal strength (Axient Digital, Axient) Access control for compatible systems Axient Digital Remote Control (in-app purchase required) Frequency Gain Audio output mute Channel and device name Device locks with ShowLink Transmitters (ADX) Transmitter gain RF mute RF output power level Frequency changes Device name Menu lock Tone GeneratorAxient Remote Control (in-app purchase required) Frequency assignment Audio output level Audio output muting Channel and device naming Menu locking Transmitter Settings Transmitter gain RF muting RF output power level Frequency changes Device naming Menu locking PSM1000 Remote Control Transmitter Settings (in-app purchase required) Frequency assignment RF muting RF output power level Audio input gain Audio input level Audio mode Channel and device naming Menu locking QLX-D Remote Control Receiver Settings (in-app purchase required) Frequency assignment Audio output level Audio output muting Channel and device naming Menu locking UHF-R Remote Control Receiver Settings (in-app purchase required) Frequency assignment Audio output level Audio output muting Channel and device naming Menu locking ULX-D Remote Control Receiver Settings (in-app purchase required) Frequency assignment Audio output level Audio output muting Channel and device naming Menu locking

• size 210 MB

• version 1.4

Secolink app lets you control and monitor your Secolink car security system from your iPhone. App works only with Secolink security system legacy GSM communicators: GSW, GSW1, GSW1G, GSW1GP (production discontinued in 2013).Main features:o Remote engine controlo Check alarm system status.o Get car location.o Alarm system SIM card account balanceo Control up to 6 objects. Ask your security professional to setup the application correctly and for more details about Secolink production.

• size 41.0 MB

• version 2.00

Micron Control Alarm System ControlMicron Security Products Ltd Micron Control allows authorised local and remote control of multiple internet connected micron alarm systems, enabling any Apple device with a WiFi or 3G/4G connection to become a remote icon control keypad. Micron Control also enables local and remote control of any other brand of alarm system when a micron EC-11 alarm server is installed. Functionality-Connect and control, locally and remotely, multiple micron internet connected IP security systems-Connect and control, locally and remotely, any other brand of alarm configured with microns EC-11 alarm server-Program and save settings for users and installers-Real-time view of alarm system status-Real-time event log and reporting-Report using push notifications, text or email-Full alarm control including arm, disarm and night arm by area-Output control-Panic, Medical, Fire

• size 40.9 MB

• version 2.1

Using the alarm system app BuildSec you are in control of your modern TELENOT hazard alarm system at any time and any place. The alarm system app BuildSec is a user software application for smartphones and tablets which allows a user to operate and control the operating states of TELENOT hazard alarm systems. COMPATIBLE HAZARD ALARM SYSTEMS Intruder alarm control panel hiplex 8400H (from firmware version 01.01) Intruder alarm control panels complex 200H / 400H, wireless alarm system compact easy (from firmware version 15.43) in connection with transmission devices 1516 / 2516 / 3516 (from firmware version 6.20)

• size 6.8 MB

• version 2.3.1