bs-16i is a 16 multi-timbral playback sampler. It supports SoundFont, and can be used for keyboard instrument, MIDI sound module, and MIDI player. You can send bs-16is output stream to other apps directly.- To load the specified soundfont file, the device have to ready free memory larger that file size of it.- This application collects following information: Device name, OS version, User Location, SoundFont file name, CoreMIDi I/F name.
DXi is a FM synthesizer application inspired by 80s most popular FM synthesizer. You will enjoy creating sounds as well as playing music with this application. * Supports Audiobus.
AUM is the flexible audio mixer, recorder, and connection hub for your iPad, iPhone and iPod touch. Connect hardware inputs and outputs, Audio Unit extensions, Inter-App Audio apps, Audiobus, soundfile players, built-in signal processing and filters, in any configuration you want. Top-notch technical stuff and highly recommended - MusicAppBlogFeature rich, powerful, intuitive, and simple to use - DubSpotExecutes live mixing with surprising ease, with a load of extensive features under the hood, quick snappy response on the screen and audio - AudioNewsRoomFEATURES High quality audio up to 32-bit 96kHz Clean and intuitive user interface with crisp vector graphics Extremely compact and optimized code, very small app size Unlimited number of channels Unlimited number of effect slots Inserts and sends are configurable pre/post-fader Internal busses for mixing or effect sends Supports multi-channel audio interfaces for both inputs and outputs Supports Audio Unit extensions, Inter-App Audio and Audiobus Audiobus state saving Highly accurate transport clock Metronome with selectable output and optional pre-roll Sends host sync to Audio Unit plugins and IAA apps Play in time with Ableton Link Synchronize external hardware via MIDI Clock FilePlayer with sync and looping with access to all AudioShare files Records straight into AudioShare storage space Record synchronized beat-perfect loops Built-in nodes for stereo processing, filtering and dynamics Latency compensation makes everything align at the outputs Separate Inter-App Audio / Audiobus output ports Built-in MIDI keyboard Fully MIDI controllable MIDI Matrix for routing MIDI anywhereBUILT-IN SIGNAL PROCESSING Stereo balance Stereo to mono Stereo panning Mid/Side balance Mid/Side - Stereo convert Invert Phase Parametric EQ Low-shelf filter High-shelf filter Low-pass resonant filter High-pass resonant filter First order All-pass filter Second order All-pass filter Gain Hard clip Saturation Lookahead peak limiter
Your Bread and Butter Live Giggin Module and Rompler You get 3-FREE Sounds (MKS Piano 2, Acoustic Grand, Brass)The MKSensation is a players live gigging module designed to give you the bread and butter sounds needed for a live session, gig, church service, or studio session. The layout, ease of use, sliders, and simple functionality is what has made our PC version so successful. These Devices and Anything Higher will Work:iPad 4th Generation, iPad Mini 1-4, iPad Air 1-2These iPads Will not work: iPad 1, iPad 2, iPad 3rd Generation, iPad Pro (GUI Not Ready)
Nord Beat 3 is a free 6-track CoreMIDI Step Sequencer for iPad and a perfect companion for the Nord Drum 3P and Nord Drum 2 Modeling Percussion Synthesizers. It can also be used with any external MIDI drum module, synth or sampler (or even other iPads app via Virtual MIDI).Features:- 8 Patterns- 3 Velocity levels- Velocity faders- Adjustable pattern length (1-16)- Copy/Paste patterns- Flexible cueing system- Shuffle- Step modifiers for Flam, 32th and 32 triplet notes- Mute button for each track- Tap Tempo- Pad mode with velocity zones- Load/Save song- MIDI Setup (Channel/Note number)- Flexible MIDI input/output routing - Virtual MIDI supportNord Beat 3 requires a CoreMIDI compatible MIDI interface. It is a MIDI sequencer that sends MIDI messages to a CoreMIDI destination.
TouchOSC is a modular OSC and MIDI control surface for iPhone, iPod Touch and iPad by hexler. It supports sending and receiving Open Sound Control and MIDI messages over Wi-Fi and CoreMIDI inter-app communication and compatible hardware. FEATURES- Import up to 125 videos into your set via iTunes File Sharing or from the iPads library- Playback and mix two channels of video with independent playback speed control and 10 different blend modes- Display the output on an external screen or projector using any iPad-compatible video-out adapter- Use the iPads front and back-facing cameras as input to integrate live footage into your set- Apply one of 36 effect filters to each channel and the master output- Control effect parameters using the multi-touch enabled preview area- Preview the output in full-screen on the iPad- Save and load your set to recall, backup or transfer sets between iPads using iTunes File Sharing- Configure the interface layout to your preference- 10 demo clips by hexler and pixeldelay included- CoreMIDI support allows full control of TouchViZ wirelessly using OS X CoreMIDI Network sessions, using iPad MIDI interfaces such as iRig MIDI, iConnectMIDI, MIDI Mobilizer II, Yamaha i-MX1, or by connecting a compatible USB MIDI-controller using the iPad Camera Connection Kit- Open Sound Control support allows full control of TouchViZ over WiFi from any application that supports OSC such as Max/MSP, PureData, Max4Live, TouchOSC and others- Built on the latest iOS and OpenGL ES technology
TEFpad is a tablature editor designed for the iPad that implements most features available in the TablEdit desktop program. It is also compatible with iPhone and iPod Touch. The PDF can be emailed or opened in a third party app- iTunes file sharing- WIFI file sharing- Dropbox support- MIDI Playback with full real time control (speed, pitch, volume and MIDI instrument)- Metronome and count down settings- Ability to change the soundfont- Playlist- Customize background color for screen, special keyboard, palettes,- Print to an Air Printer- Export playback as a MIDI file or a WAV file- ABC file export- Time and Key signature setup along with a transpose feature- Measures management (Add/Delete/Copy/Move)- Instrument setup (String number, Tuning, Capo, Clef)- Quantize notes (after a MIDI import)- Enter notes and rests in the tablature or standard notation- Edit notes (duration, velocity, special effect, staccato)- Create chord diagrams- Insert text, tempo changes, pick strokes and fingerings- Reading guides (repeats and endings)- Fingerboard or keyboard view- External keyboard support- Support for Page turning- Print options dialog- Support drum tabs and pedal steel guitar tabs- Pick-up measure- Grace note management- iPad Pro support
Elsa is a retro style sampling keyboard with tempo based looping. Record, save, load, reverse samples with a multi octave on screen keyboard or plug in your core midi device of choice, soft- or hardware. Additionally at playback time, sample length can also be controlled by a set of sample dividers, 1-8.+++ Sample keyboard+++ Tempo based looping+++ ADSR+++ Bit/sample rate crush+++ Reverb+++ Resonant band pass filter+++ Record, trim, normalise, reverse, pre note shift, zoom+++ Multi octave keyboard+++ 3 loop modes (one off, forward, forward-reverse)+++ 3 start/stop modes (one for all, one per note, one per octave)+++ Playback length dividers (1,2,3,4,5,6,7,8)+++ Arpeggiator+++ Presets, save/load settings+++ Import/export ACP 2.0+++ Inter app audio+++ Audiobus+++ Core Midi+++ Link
mood - A personal interpretation of the legendary Analog Synthesizer by Eugenio GiordaniJordan Rudess says:The Mood synth has immense sonic ability. It has captivated my imagination and sense of discovery. Features: Audiounit v3 Audiobus and Inter-App Audio Sender/Filter Audiobus 3 MIDI support Share Presets and Samples between App and AUv3 iOS Universal 3 Oscillators Noise Generator with own envelope Sample WARP FM Module Input Source Processing VCF Filter Ladder 24db per octave ADSR VCA Mono or 16 voices Polyphonic Keyboard Tracking and Control Keyboard Ribbon Style XLFO 7 shapes + Sequencer Classical/Vintage Reverberator Stereo Delay Ring Modulator Distort Output Full Parameters MIDI/LFO/Accelerometer mapping Presets Interpolation Pad MIDI Clock and Ableton Link Record to .wav file AudioCopy/Audioshare/Open In etc
Brainwave is a clip based MIDI sequencer. Bring your melodies and drum beats into life with the streamlined and intuitive MIDI clip editor. Drive up to 16 instruments* built-in sampler with 16 voices * volume envelope * loop points and loop modes (once, loop, ping pong)* transpose offset to tune samples* built-in samples or user samples, through iTunes sharing* drum pad mode allowing for 16 individual samples to be mapped to drum pads* mixer interface to solo/mute and adjust track volumeMIDI Clip Editor* 16 ticks per beat* up to 256 clips per song* sequence melodies and beats in the clip editor* sequence all instruments in the same clip* fine control over note length and velocity per note or for a selection of notes* copy a note sequence from one instrument to another* make a copy of a MIDI clip to create new variations* unlimited length * looping mode to easily iterate on a clipSong Arrangement* quick start with built-in templates* sequence and layer MIDI clips* reorder clips to organize the visual layoutInteroperability* export as multi-track MIDI file to your favourite DAW* manage songs and samples via iTunes sharing* email songs * open songs from other applications* support for DropboxConnectivity* Connect to coreMIDI network session* Connect to external hardware synths using USB and the camera kitTo see it in action: http://www.youtube.com/watch?v=6hqqxm3MOn4http://www.youtube.com/watch?v=NXtTliLLkfghttp://www.youtube.com/watch?v=nUuRmNZ8pYchttp://www.youtube.com/watch?v=JzGpP3C9pr8http://www.youtube.com/watch?v=rV-ILy9nldQ
Symphonix Evolution Player is a basic MIDI file player that supports General MIDI files using the GM/GS specification with up to 16 tracks. It also allows you to play Symphonix Evolution files created in our Symphonix Evolution iPad app on your iPhone using a suite of over 150 wavetable instruments Open MIDI files directly from Safari or Mail, or drag them into iTunes on your PC and sync to your device. We are currently looking at ways that the functionality can be extended in future updates - send suggestions to our support mailbox if you have ideas youd like us to add See the full-featured Symphonix Evolution iPad app for more features, including:* Real time MIDI recording* Create and edit score notation by dragging notes* Selection of full or reduced instrument set* Ability to change keyboard width* Much, much more
n-Keyboards lets you play on your mobile device two instruments at once, going from acoustic sounds like piano or violin to modern ones like synthesizers and sound effects. You can choose among the many sounds included (over 100) or you can connect two external Apps via Interapp or Midi, using n-Keyboards as a controller.n-Keyboards can also be played as an Interapp instrument within other applications, or it can send audio to Audiobus compatible applications. Main features: Audiobus support Interapp & AU3 (load external InterApp Instruments or to play the app inside an external host) Linked mode to play the same notes at the same time on the two keyboards Hold monophonic, Hold polyphonic and Sustain keyboard mode Keyboard Zoom and Scroll Pitch wheel MIDI input and output Built-in Metronome Presets savings Polyphony voices setting (into the device general settings) 10 Octaves Keyboard
Full-blown audio/DJ-mixer in the palm of your hands No additional hardware required. Tremor is a multi-input turntable-based audio mixing system. To reset to the original effects, enable the reset setting via the Tremor settings menu (via the iOS device settings).Specifications (iPad): 2 Turntables for audio playback, mixing and recording (iPad supports either 2, or 4 decks) 2 scratch modes available [SeeknScratch | StopnScratch] Ability to seek back/fwd based on turntable rotation direction Dynamically change between scratch modes during use CD/High-quality, low-latency audio playback and recording (44.1Khz) Track preview using headphones (Must be enabled via Settings, requires 1/8 Stereo to Dual Phono Y-cable to split output) Touch and seek track positioning Sound Effect Pad (with option to load your own custom songs or sound effects for a maximum of 16 effects) DSP FX Panel / Audio Analysis (Per-Turntable Deck) Phaser Effect Tremolo Effect Pan Delay/Echo 3-Band Equalizer Real-time Oscilloscope / Waveform Displays Microphone recording support Copy out recordings using iTunes file copy 16 preset (recordable) sound effects (with option to load your own custom songs or sound effects) Bluetooth playback is supportedSupported Audio Formats:AAC/ALAC/AMR/HE-AAC/iLBC/IMA4/Linear PCM/MP3/-law and a-law
SymphonyPro 5 is a complete and intuitive app for writing music notation on iPad. It allows you to compose music for just about any size ensemble, from piano, symphonies, band, lead sheets, chord charts, guitar tabs, and more. KEY FEATURES Introducing Handwriting Recognition for Apple Pencil & touch Starting Version 5, Handwriting is the only In-App Purchase to enable the complete app Now download SP on your iPhone 24+ professionally recorded and sound-designed acoustic instruments, free out of the box Earlier features offered free, to existing & new owners 114 built-in instruments for playback, and auditioning the notes you entered Create in standard music notation or tablature Edit with an on-screen piano, QWERTY keyboard, or a MIDI input device Dozens of shortcuts & gestures to edit & navigate Reduce your score size, range, or combination of parts for viewing & editing* Print directly to AirPrint Up to 48 instruments, 100 staves, 4 voices/layers per score Record a part in real-time with clicks at the beat with optional emphasis Backup & sync your scores with iCloud* Import MusicXML, MIDI, MXL, or Symphony files Export as a PDF, MusicXML, MIDI, AAC, or Symphony file Large selection of articulations & dynamics Multi-measure rests* for parts Grace notes Customizable notehead symbol & colors Chord symbol, lyric, and annotation tools Edit the properties of multiple notes and rests simultaneously by multi-note select Copy/Paste function supports partial & multi-bar/staff select Unlimited undo/redo Customizable stem directions & note beaming Transposing & concert pitch score option Change tempo or clef anywhere in score or bar Stream audio or share your screen wirelessly with AirPlay Advanced document management Create your own custom project template or use a built-in one Customizable part groupings for SATB and instrument families Customizable chord symbol, lyric, and annotation font Loop playback feature Auto-save support* Previously a paid upgrade, but now free starting Version 5For More information, please visit: http://www.symphonypro.net http://forums.symphonypro.net Facebook page at www.facebook.com/symphonyapp Learn about the iPhone-only app: bit.ly/symphonyiphone