X32 FMP Remote is an iOS App to allow Remote Control of Faders, Mutes and Pans (FMP) of the Behringer X32 Series of Consoles via WiFi.

#

Similar Apps

1
M32 FMP Remote
2
X Air FMP Remote
3
M-400FM Remote
4
X-M 32 TB
5
Soundcraft ViSi Remote
6
X32 iEQ
7
03D Remote
8
M32 iEQ
9
X Air iEQ
10
01v96 Remote LE
11
TF StageMix
12
01v Remote
13
HX-WIFI
14
PNJ FPV
15
NH-WIFI
16
X-Spy 2.0
17
MD_WiFiUFO

X32 FMP Remote alternatives

ShurePlus MOTIV

Use the ShurePlus MOTIV app for high-quality digital recording and editing with any MOTIV microphone or as a stand-alone tool. Features Make real-time adjustments to the MV88 iOS Digital Stereo Condenser Microphone: Polar pattern selection (stereo, cardioid, bidirectional, raw mid-side) Adjustable stereo width (60, 75, 90, 105, 120, 135 degrees) Wind noise reduction: Low-frequency cutoff filter to eliminate rumble caused by environmental noise Left-right channel swap: Flips the left and right audio channels to match video that is recorded when the microphone is reversed in certain phone/tablet positions. Record uncompressed audio at multiple bit depths/sample rates 36 dB of adjustable gain for MOTIV microphones High-resolution metering Preset modes to automatically adjust gain, equalization, and compression 5-band equalizer Limiter Compressor Edit recordings using trim or split options Share files via email, text, iTunes, Airdrop and Dropbox Save to compressed formats (ALAC, AAC 96, 128, 256) Save your audio recording as video

  • size 23.2 MB

Network Analyzer - wifi scanner, speed test, tools

The ultimate tool for network analysis, LAN scanning and problem detection. Network Analyzer can help you diagnose various problems in your wifi network setup, Internet connectivity, and also detect various issues on remote servers thanks to the wide range of tools it provides. Everything works with both IPv4 and IPv6.WIFI LAN SCANNER Fast and reliable detection of all network devices (wifi & VPN) IP addresses of all discovered devices NetBIOS, mDNS (bonjour), LLMNR, and DNS name where available Pingability test of discovered devices IPv6 availability and discovered IPv6 addresses Wake on LAN (WOL) including remote WOL Scan of custom IP ranges Filtering and search in the discovered device listPING & TRACEROUTE Round trip delay including IP address and hostname for every network node Geolocation data including latitude, longitude, country, city, and time zone AS number and network name information Complete trace route visualization on the map Graphical ping statistics updated in real time Configurable ICMP/UDP probes for traceroute Configurable ping payload size Both IPv4 and IPv6 - selectablePORT SCANNER Fast, adaptive algorithm for scanning the most common ports or user specified port ranges Detection of closed, firewalled, and open ports Description of the known open port services Scan of complete port range or user-editable common ports Both IPv4 and IPv6 - selectableWHOIS Whois of domains, IP addresses and AS numbers DNS LOOKUP Functionality similar to nslookup or dig Support of ANY, A, AAAA, CAA, CNAME, HINFO, MX, NS, PTR, SOA, SPF, SRV, SSHFP, TLSA, TXT records Decoding and showing DNSSEC records such as DNSKEY, CDNSKEY, RRSIG, NSEC3PARAM, NSEC, NSEC3, DS, CDS INTERNET SPEED Test of both download and upload speeds Graphical speed test view Speed test history NETWORK INFORMATION Default gateway, external IP (v4 and v6), DNS server, HTTP proxy Wifi network information such as SSID, BSSID, IP address, and subnet mask Cell (3G, LTE) network information such as IP address, network provider, MCC, MNC Monitor of wifi, cell and VPN data usage (both sent and received data since the last boot) LOCAL SERVICE DISCOVERY Bonjour service browser UPNP/DLNA service and device browserMORE Full IPv6 support everywhere History of all performed tasks with the possibility to star the favorite ones Export by email, AirPrint, and AirDrop for most tools Copy/paste support Detailed help Regular updates, support page

  • rating 4.59999
  • size 15.6 MB

Calculator 3.0

Welcome to Calculator 3.0 for Apple Watch, iPhone, iPad, and iMessage Frustrated with the bland and complicated Calculators for iPad, Apple Watch, and Apple TV Calculator 3.0 was created to provide a better simpler choiceall for Free. The Original Calculator with Themes for iPad and Apple Watch is back Rewritten and redesigned for Apple Watch, iPhone, iPad, and iMessage with Bolder Fonts, iPad Multitasking, Native Watch Support with Complications, and Snappier Performance. Apple WatchThe Apple Watch Calculator with Colored Watch Band Themes Designed for the mobile mathematician with a Scientific Calculator, Tip Calculator, Unit Converter, a Tally Counter, Twenty-Six personalized colored themes for your watch band or style, and Force Press (firmly press) on the Calculator to changes themes Big and bold fonts for readability Haptic feedback upon button presses Watch Face Complication support for quick access Tip Calculator with Digital Crown support Conversion Calculator with Length, Weight, Volume, Area, and Time units Counter, Tap to increase or use the Digital Crown for faster input, force press for options Settings, with option to enable Counter number modular face complication support Autorotation to Share, when enabled the app rotates when rotating your wrist to show a calculation, tip percentage, unit conversion, or tally number to another personiPhone and iPad Simple bubble dark interface with Scientific Calculator iPad Multitasking Support (Landscape and Portrait) Haptic feedback upon button presses (iPhone 7 and greater) Gesture Controls, Swipe Up for Light Mode, Swipe Down for Dark Mode, Swipe Left to clear the displayed number 3D Touch Icon Copy Last Number (iPhone 6s and greater) Bolder fonts Tap number to copy Drag and Drop support for iPad, perfect for the new iPad Multitasking in iOS 11- Tap and hold on the displayed number to select for dragging as text into another app - Drag and Drop text numbers from other apps (Mail, Safari, Notes, etc) over the displayed number area to include the number in the current input AR Mode for supported devices for funsiMessage app Simple Calculator Tap number to paste into message thread

  • rating 4.33333
  • size 32.2 MB

More Information About alternatives

M32 FMP Remote

M32 FMP Remote is an iOS App to allow Remote Control of Faders, Mutes and Pans (FMP) of the Midas M32 Series of Consoles via WiFi.

X Air FMP Remote

X Air FMP Remote is an iOS App (iPhone and iPad) to control the Faders, Mutes and Pans of the Behringer X Air series of consoles.

M-400FM Remote

M-400FM Remote is an iPhone App to remotely control the faders and mutes of the Roland M-400 and M380 series of Mixing Consoles via WiFi. To use the app you must have UMMU Server installed on the host computer, which is a free download from http://www.strongsoft.co.uk

X-M 32 TB

X-M 32 TB is an iOS App (for both iPhone and iPad) that allows control of the talkback functions of the Behringer X32 and Midas M32 series of mixing consoles via WiFi.

Soundcraft ViSi Remote

DescriptionSoundcraft ViSi Remote 3.4.3 is an iOS application that allows remote control of Soundcraft Vi, Si Compact, Si Performer, Si Expression and Si Impact mixing consoles wirelessly from your iPad device using no additional hardware other than a wireless access router connected to the Harman HiQnet Ethernet port of the console. With ViSi Remote you are free to roam your venue and adjust mixes and other audio parameters directly from the iPad. Functions controlled: Channel naming Input faders and mutes Bus, master LR and VCA master faders and mutes Channel strip settings, including:- Mic Gain and 48V- Phase Invert - HPF & LPF (LPF on Vi consoles only)- Delay- Channel EQ with grabable parametric EQ curve- Gate and Compression settings- Pan- LR and Mono (C) bus routing Graphic EQs on all bus outs Channel contributions to each Aux Mix Channel contributions to each FX bus (Si consoles only) Mix contributions to each matrix bus DMX Masters (Si Performer Only)

  • rating 1.92308
  • size 46.1 MB
  • version 3.4.3

X32 iEQ

iOS App to allow AutoEQ of Behringer X32 consoles, and Behringer DEQ2496 MIDI controlled DEQ. Also allows direct control of DEQs via WiFi from iPhone and iPad.

03D Remote

03D Remote is an iOS App for remote control of the Yamaha 03D series of mixing consoles via WiFi. To use the App, you must have UMMU Server installed on the host computer (A free download from the StrongSoft website).Or you can use UMMU Box, a standalone interface manufactured by StrongSoft, and available on eBay. UMMU Server is a free download from the StrongSoft website.

M32 iEQ

M32 iEQ is an iOS App for the Midas M32 series of consoles. It features a comprehensive audio spectrum analyser, and allows remote operation via WiFi of the M32 graphic equalisers, and Auto-EQ of the sound system to compensate for shortfalls in the acoustics of the auditorium.

X Air iEQ

iOS App for iPhone and iPad to allow AutoEQ of Behringer X Air consoles, and Behringer DEQ2496 MIDI controlled DEQ. Also allows direct control of DEQs via WiFi from iPhone and iPad.

01v96 Remote LE

Light Edition of 01v96 Remote - Allows control of 4 faders and channel switches of the Yamaha 01v96 Mixing Console to demonstrate the functionality of MIDI over WiFi to the user, thereby encouraging the user to buy the full app

TF StageMix

TF StageMix is an application for the Apple iPad that provides wireless control of TF series consoles, allowing remote mixing from audience seating, in front of floor monitors, or any other listening position. It can also be used at the console as an extension of the consoles own interface. * TF Firmware V1.10 or later is required to use the TF StageMix.

  • size 42.7 MB
  • version 3.5.1

01v Remote

Remote control over WiFi for the original Yamaha 01v series of Mixing consoles. To use this App, UMMU Server must be installed on the host computer (Available for OSX and Windows, Lion and Windows 7 supported). if you use UMMU Box, you dont need a MIDI interface or host computer.

HX-WIFI

This is a APP for the four axis aircraft control via WiFi protocolThis APP function:1.Remote control the four axis aircraft by the IOS machine(iPhone/iPad/iPod).2.Display the real-time video which taken by the camera on the aircraft,video data transmitted via 2.4G WiFi protocol.3.Take the photo and video record on the IOS machine(iPhone/iPad/iPod).

  • size 31.5 MB
  • version 3.0.0

PNJ FPV

This is a APP for the four axis aircraft control via WiFi protocolThis APP function:1.Remote control the four axis aircraft by the IOS machine(iPhone/iPad/iPod).2.Display the real-time video which taken by the camera on the aircraft,video data transmitted via 2.4G WiFi protocol.3.Take the photo and video record on the IOS machine(iPhone/iPad/iPod).

  • size 34.8 MB
  • version 6.1.0

NH-WIFI

This is a APP for the four axis aircraft control via WiFi protocolThis APP function:1.Remote control the four axis aircraft by the IOS machine(iPhone/iPad/iPod).2.Display the real-time video which taken by the camera on the aircraft,video data transmitted via 2.4G WiFi protocol.3.Take the photo and video record on the IOS machine(iPhone/iPad/iPod).

  • size 28.9 MB
  • version 3.0

X-Spy 2.0

This is a APP for the four axis aircraft control via WiFi protocolThis APP function:1.Remote control the four axis aircraft by the IOS machine(iPhone/iPad/iPod).2.Display the real-time video which taken by the camera on the aircraft,video data transmitted via 2.4G WiFi protocol.3.Take the photo and video record on the IOS machine(iPhone/iPad/iPod).

  • size 29.7 MB
  • version 2.0.4

MD_WiFiUFO

This is a APP for the four axis aircraft control via WiFi protocolThis APP function:1.Remote control the four axis aircraft by the IOS machine(iPhone/iPad/iPod).2.Display the real-time video which taken by the camera on the aircraft,video data transmitted via 2.4G WiFi protocol.3.Take the photo and video record on the IOS machine(iPhone/iPad/iPod).

  • size 37.5 MB
  • version 2.0.0