TopXGun Assistant!

Fly like a professional - capturing smooth, perfectly framed, and visually stunning imagery. With autonomous and semi-autonomous flight modes, Autopilot enables you to execute flight and camera control sequences that were previously too difficult or impossible to perform manually. The aircraft will intersect the imaginary laser created by your device.

• rating 4.4

• size 166 MB

The WM Assistant Software is aimed at assisting the parameters configuration of WooKong-M. In addition to the accurate real-time flight data display, there is also another new feature - Remote Parameter Adjustment. - Restore Factory Settings.

• size 11.1 MB

Configure and monitor your Cleanflight/Betaflight/INAV multicopter with your iPhone or iPad Mobile Flight connects to your multicopter with Wi-Fi or Bluetooth 4.0. See below for the list of supported communication modules. * TBS Crossfire TX and TBS Crossfire Diversity RX.Continued use of GPS running in the background can dramatically decrease battery life.

• rating 5.0

• size 38.3 MB

The NM Assistant Software is aimed at assisting the parameters configuration of NAZA-M. In addition to the accurate real-time flight data display, there is also another new feature - Remote Parameter Adjustment.You only need an IOS equipment that supports Bluetooth 4.0 (such as: iPhone 4s, iPhone 5, iPod touch 5, iPad mini, iPad 3/4,). - Restore MC default settings.

• size 11.1 MB

EHANG Play - For GHOSTDRONE 2.0All you can imagine about smart flight. A single App that fully controls GHOSTDRONE.Take off, waypoints, hover, follow, return, land, all done with a simple click. For more information, please visit:www.ehang.com/en/

• rating 4.4

• size 130 MB

DJI Assistant SoftwareMain Features:Real-time Parameter AdjustmentsSupport for Bluetooth 4.0Support for DJI A2 Flight Controller Systems(with master controller firmware version updated to V2.2 or above, and LED firmware version updated to V1.1 or above )Support for Ronin and Ronin-MDJI A2 Flight Controller Features:- Real-time Parameter Adjustments- Real-time Flight Data Display- Basic Settings: Aircraft, Mounting, RC, Gain, IMU & Compass- Advanced Settings: Motors, F/S, IOC, Gimbal, Voltage, Flight Limits and Landing Gear- Restore Default Settings- Multi-language SupportDJI Ronin Features:- Gimbal Settings: Motor, SmoothTrack- Remote Control Settings: Deadband, Maximum Speed, Smoothing, Endpoint and Channels- Live Data Feed- Restore Default Settings

• size 17.7 MB

• version 1.1.29

The NM Assistant Software is aimed at assisting the parameters configuration of NAZA-M. In addition to the accurate real-time flight data display, there is also another new feature - Remote Parameter Adjustment.You only need an IOS equipment that supports Bluetooth 4.0 (such as: iPhone 4s, iPhone 5, iPod touch 5, iPad mini, iPad 3/4,). - Restore MC default settings.

• size 11.1 MB

• version 1.3.12

The WM Assistant Software is aimed at assisting the parameters configuration of WooKong-M. In addition to the accurate real-time flight data display, there is also another new feature - Remote Parameter Adjustment. - Restore Factory Settings.

• size 11.1 MB

• version 1.5.27

DescriptionDEIF Remote APP gives remote access to a series of DEIF products connected to the internet. The APP allows you to browse available parameters and get instant overviews of your setup. It is highly recommended to secure your data setup behind a firewall/VPNSUPPORTED DEVICES:- DEIF Advanced Energy Meter, AEM 180, AEM 305, AEM 380- DEIF Advanced Power Meter, APM 305, APM 380- DEIF Multi-Instrument, MIC-2- DEIF Advanced Genset Controller, AGC-3 (test version with limited parameters)FEATURES:- Supports an unlimited number of products for remote access- Gain remote access to DEIF products by typing in remote device IP address and Modbus ID- Name the remote products- Save product type setup as default to simplify later setups of other units.- Two view setups per product lets you choose the overview you need- Drag n Drop to arrange and sort your parameter lists - Simply modify parameter views in edit mode- Use graph mode to visualise trending and parameter behavior- Use log mode to initiate time-stamp parameter logs over set periods- Set/change data refresh rates: 1 sec, 5 sec, 30 sec, stop, refresh now.- Show/hide info bar for detailed information on your remote device- Show/hide dedicated Modbus addresses for e.g. validating onsite PLC programming- Tap DEIF logo to view information about supported DEIF products and APP version.

• size 1.4 MB

• version 1.20

MagicLife is an APP designed for full color LED controller as a remote controller via bluetooth. It supports a variety types of driver IC:SM16703,TM1804,UCS1903,WS2811,WS2801,SK6812,SK6812_RGBW,LPD6803,LPD8806,APA102,APA105,TM1814,TM1914,TM1913,P9813,INK1003,DMX512. Main function:Selecting driver-IC;Setting RGB order;Setting total pixels number;Selecting effects;Picking a static color;Modifying speed for effect;Modifying brightness.

• rating 2.61111

• size 1.4 MB

• version 1.0

TorqView is a free iOS App that lets you view all the operating parameters of a Torqbyte CM5 or CM5-LT controller on your iPhone or iPad in real-time. Controller data is streamed wirelessly to your Apple device over a Bluetooth Low Energy connection provided by the CM5 or CM5-LT Bluetooth expansion module. Displayed controller parameters include:- Engine Speed- Turbocharger/Supercharger Boost- Main Output Mode- Main Pump Output Duty- Main Pump Output Current- Auxiliary Output Mode- Auxiliary Output Master- Auxiliary Pump Output Duty- Auxiliary Pump Output Current- General Purpose Output 1 (GPO 1) Mode- General Purpose Output 1 (GPO 1) Duty- General Purpose Output 2 (GPO 2) Mode- General Purpose Output 2 (GPO 2) Duty- Analog Input A Voltage- Analog Input B Voltage- General Purpose Input 1 (GPI 1) State- General Purpose Input 2 (GPI 2) State- CM5 or CM5-LT Firmware VersionThe TorqView iOS App supports automatic screen rotation and allows switching between day and night display modes that can be changed from a bright color scheme for daytime viewing and an inverted dark color scheme for nighttime viewing.

• size 12.8 MB

• version 1.0

ENCompletely rebuilt application that allows you to control the home electronics module using Lan Controllers Tiny tinycontrol.euThe application allows you to:-control to 6 components (on/off) on a single lan controller-analysis to 20 parameters in one lan controller -possibility of setting divider-adding infinitely many drivers configuration (infinitely Lan Controller)-connection to statistical data of the controller from the server (thingspeak.com)-export all software settings via email.-change all icon images to lan controller and all controlled outputs-Spend as application update. However, it was written completely from scratch.PLAplikacja w jzyku angielskim. Zostaa ona jednak napisana cakowicie od nowa.

• size 11.2 MB

• version 2.0.32

HAWE eControl - The smart configuration and diagnostic cockpit for electronic proportional amplifier in hydraulic applications. Connect your smartphone with the HAWE EV2S-BT proportional amplifier plug via Bluetooth within a few seconds. Ideal suited for:+ Initial operation at remote locations+ Remote diagnostics and condition monitoring of proportional valves+ Troubleshooting in electro-hydraulic systems+ Adjustment and optimization of your configuration in real time+ Duplicating configurations without computer or bus linksFunctions:+ Avoid unauthorized access by setting a password+ Live values such as set point, output current, supply voltage and temperature+ Scaling of analogue input signals+ Scaling of PWM output signals+ Configuration of CAN parameters + Definition of Error thresholds+ Save, load and send configurations+ Firmware update+ Support contacts+ Demo modeThe HAWE eControl App is designed and optimized for the configuration of HAWE EV2S-BT electronic proportional amplifiers.

• size 40.7 MB

• version 1.4

Fly to Discover allow you to control your Parrot Bebop, Bebop 2, FTD300X and Super300 thanks to fabulous functions such as:Main features:- Now with SKY CONTROLLER 2 support - PANORAMA create fabulous 360 picture with your Bebop- MULTIMEDIA for managing your bebop memory- VOICE CONTROL to control your bebop with your voice- Translated in English, Italian, Portuguese, French, Spanish, German and Romanian- Integrated 2D simulator to fly even when the weather does not allow it. You can familiarize yourself with all the functions of FTD without reading boring manual and without having to connect your Bebop.- Exclusive compatibility with Apple Watch Control your Bebop with your wrist - Control via analog sticks for precise driving experience at all times- Simple and intuitive graphics, cockpit customizable pull-down menus and draggable items- Compatible with Parrot SkyController and SkyController 2- Magnetometer calibration tool for Bebop and SkyController- Detailed picture settings menu for optimum results- Dynamic charts in real time: battery, altitude, speed and distance- Photo mode (DNG, JPEG 4: 3, 16: 9, Fisheye), Video mode, Time Lapse, Photo Panoramic 360- Map mode with FPV box- Localization Bebop compared to the pilot (Radar)- Follow Me Mode (Bebop follow you at a distance and height adjustable) with block angle (Bebop follow you at the same angle)- Orbit Me (Bebop will make a circle around you at a distance and adjustable speed)- Flight time and time of video recording- Return to home in case of radio signal loss or pressing appropriate button- Selection of piloting modes: Mode 1, Mode 2, Mode 3, Mode 4- Selection of flight parameters: maximum inclination, tilt speed, maximum vertical speed, maximum rotation speed- Selection of banked turn- Warning messages with vibration (optional)- Selection of flight limits: max altitude and max distance- Pause time before RTH- RTH location: takeoff or pilot- Network settings: change your Bebop name, changing country, auto or manual band (2.4GHz-5GHz), wi-fi channel with free channels and setting wi-fi password to make sure your Bebop- Function VR with deactivation video stabilization of Pitch and Roll for a VR experience even more real- Band, channel and name selection of SkyController- Compatible with iOS MFi Bluetooth Controller: Nimbus, Mad Catz, Moga rebel and others- Move the framing of Bebop dragging two fingers on the screen- Automatic recording of all flights, and section to review all the details- Function Find my drone, in case you lost your drone you can easily find it again with this function- Successfully Tested with wi-fi extender

• size 79.3 MB

• version 1.5.0

TASCAM SS250 CONTROL is a dedicated APP which enables the remote control operation to control the TASCAM Solid State Stereo Recorder SS-R250N/SS-CDR250N using Wi-Fi wireless connection. When the SS-R250N/SS-CDR250N and iOS devices are connected with Wi-Fi in the same network via router, the APP provides the transport control, MENU adjustments on the main unit and monitoring the level of the recording and playback. >Settings on PLAY and REPEAT modes and other settings under Menu are adjustable >Icon display to confirm the upload/download process of file transferring with serverUse APP remote control for direct adjustments on the main unit while monitoring Through Wi-Fi network or the Ethernet connection, it enables the control of the remote operationIncluded Screen Lock to prevent handling mistakesSupported model: TASCAM SS-R250N (Firmware V1.10 and later), SS-CDR250N (Firmware V1.10 and later)

• size 31.4 MB

• version 1.1.0