SpeakerDraft makes it extremely easy and fun to optimize the bass response of your next loudspeaker design.- Visually optimize the low frequency response of sealed or ported box designs.- View frequency response changes due to parameter adjustments in real time.- Visually identify the first box resonance frequency.- Quickly browse through loudspeaker designs and/or drivers to select a winning combination.- Add your own drivers to the built-in driver database or customize existing driver parameters.- Recommended box volume and recommended port length (for ported boxes) make it easy to create a quality subwoofer design.

SpeakerDraft alternatives

ShurePlus MOTIV

Use the ShurePlus MOTIV app for high-quality digital recording and editing with any MOTIV microphone or as a stand-alone tool. Features Make real-time adjustments to the MV88 iOS Digital Stereo Condenser Microphone: Polar pattern selection (stereo, cardioid, bidirectional, raw mid-side) Adjustable stereo width (60, 75, 90, 105, 120, 135 degrees) Wind noise reduction: Low-frequency cutoff filter to eliminate rumble caused by environmental noise Left-right channel swap: Flips the left and right audio channels to match video that is recorded when the microphone is reversed in certain phone/tablet positions. Record uncompressed audio at multiple bit depths/sample rates 36 dB of adjustable gain for MOTIV microphones High-resolution metering Preset modes to automatically adjust gain, equalization, and compression 5-band equalizer Limiter Compressor Edit recordings using trim or split options Share files via email, text, iTunes, Airdrop and Dropbox Save to compressed formats (ALAC, AAC 96, 128, 256) Save your audio recording as video

  • size 23.2 MB

Speaker Box Lite(Box volume calculation)

This program is designed to calculate the volume of the subwoofer box, according to his parameters Thiele-Small(FS, VAS, QTS). Calculation available vented and closed enclosures for each of them you can draw graphs of frequency response, phase response and time delays. DONT FORGET Leave comments and wishes on development of the project, and you have the opportunity to support the development of the money if our program was useful for you.

  • rating 5.0
  • size 32.3 MB

Audio Signal Generator including Sweeps & Noise

This is the highly recommended and praised Function Generator App - an amazingly great and powerful tone generator. Enriched with a vast amount of features yet it is extremely intuitive and designed for simplicity. The Function Generator is AMAZINGLY INTUITIVE and SIMPLE AND THESE ARE THE ADVANCED SETTINGS/FEATURES (upgrade to PRO required):=> Extending The Frequency Range=> Extending The Sweep Times=> Changing Min/Max Slider Frequency Ranges => Changing Max Sweep Time Slider Range=> Changing Signal Amplitude=> Enabling Of The Sweep Repeat / Wobble Function=> Frequency Slider Setting to Linear or Logarithmic=> Left/Right Channel Individual Selection=> Permanently Saving Custom Presets=> Saving Of Endless Number Of Audio Configurations=> Phase Out Setting (Phase shift of 180 of the generated signal)=> BPM (Beats per Minute) Feature=> Dual Function Generator=> Background Theme Selection (Light/Dark)

  • size 18.9 MB

DD Toolbox

The DD Toolbox includes several useful tools for setting up and analyzing high performance car audio systems. We understand installers have a lot going on while setting up a system, so the DD Toolbox layout was designed with this in mind. This allows you to do things like use the tone generator while punching numbers into the wattage calculator, all the while illuminating your trunk with the flashlight DD Toolbox features:-Wattage/ Ohms Law Calculator for determining your systems actual output wattage and impedance-Tone generator that ranges from 20Hz to 20kHz-DD Box calculator which uses DDs exclusive enclosure design theory to make a recommendation for maximum bass in your given enclosure space-Flashlight function thats able to be toggled on/off from any screen.

  • size 5.0 MB

ToneGen Audio Tone Generator Free

ToneGen Free Audio Tone GeneratorToneGen is an easy-to-use program that can be used as a sine wave generator, sound frequency generator or signal generator that can create audio test tones, sweeps or noise waveforms. ToneGen Features: Generate sine wave, square wave, triangular waveform, saw tooth waveform and impulse sound waves White noise generator or pink noise generator Sound generator supports frequencies from 1Hz to 22kHz Simultaneous tone generation of up to 16 tones at once Mono or separate stereo operation for dual tones or beats Log or linear sweep tone generation Play generated tones or save tones as a wav file Send tone files using Email and FTPToneGen Applications: Generate test tones for radio audio level alignment Calibration and testing of sound equipment or speakers Demonstration of audio principles to students Create harmonics by generating multiple sound frequencies Acoustics testing and equalization White noise generator Audio band signaling Hearing Tests (under medical supervision).

  • size 6.6 MB