This is the official Ontech Control application for Iphone. It makes it simple to remotely control your Ontech GSM Unit. The app uses SMS for communication with the GSM unit and the SMS cost will be charged as normal.
Control and monitor your WeBeHome smart home and security solution with the WeBeHome App. It works with WeBeHome Z-Wave gateway HG2, LS-10/LS-30 security and alarm system, Telldus Live devices and IP cameras. Secure your home, reduce risks, improve indoor climate and let the solution help you to make smart things when you need as you like.
Transportstyrelsens officiella appMed hjlp av Transportstyrelsens app kan du bde utfra tjnster och f information om ditt eller dina fordon direkt i din smartphone. Du kan ocks ska information om fordon som gs av andra. Ls mer om Transportstyrelsen app p http://www.transportstyrelsen.se/mobil
This app is used with our products for remote control of electrical equipment that you can buy at www.gsm-start.com. Please note that the app uses SMS to control the unit and that every SMS that is sent by the app will be charged by your operator just as a regular SMS. GSM-start, a part of Pierr Automatik AB.
For owners of the Mi|GSM product from Energenie. Use this App to take convenient control of your GSM socket and its slaves. On confirmation, the command will be sent and you will be charged the cost of the SMS [or it will be deducted from your SMS bundle] The App also stores your five most recently used commands for quick access The App is fully searchable for command functions You need an Energenie Mi|GSM socket to pair with this App
The GSM SMS Controller is a very simple device which can be used for authorized door access, controlling gates, switching of remote equipments, car parking systems. Actually the GSM SMS Controller can be used in places which require turning ON/OFF your system, machines, and equipments remotely with a SMS text from your mobile phone and protect your assets. This is very useful if you need protect your assets with low cost solution.
D9secure iOS application is used to control the D3D D9 Home Alarm system using the GSM SMS message mechanism. Application send SMS messages to the SIM card installed in the GSM Alarm control unit. With different message format, application can be used to activate & deactivate the Home alarm system.
RemoteAlarm is an easy to use yet powerful application which allows you to remotely control your Burglar Alarm System provided that GSM Protocol is supported. If you can remotely control your Home or Office System through SMS then this application might be for you. In this case make sure to change your systems PIN code immediately to avoid any unpleasant surprises.
RemoteAlarm Pro is an easy to use yet powerful application which allows you to remotely control your Burglar Alarm System provided that GSM Protocol is supported. If you can remotely control your Home or Office System through SMS then this application might be for you. In this case make sure to change your systems PIN code immediately to avoid any unpleasant surprises.
The YOYOPower app makes it easy to control your YOYOPower sockets by providing a simple touch-interface that creates the SMS commands for up to 4 GSM Control units and 20 sockets in total. Main remote control functions are: Switch each socket on and off Set a time-schedule, delay or thermostat control mode Get temperature and set a temperature warning alarm Get a warning if there is a power failureYOYOPower GSM Control is a remote control power socket just insert a SIM card and plug in the unit. The app automatically creates the SMS commands to be sent to the units.
Watts V24 central unit by FENIX:This app is developed to communicate with your V24 control unit which is a superstructural element of Watts wireless regulation (V22 thermostats, 23/25 receivers). It enables central control of a heating system i.e. the programming and control of heating throughout a whole building from one location and is intended for all types of electric direct-heating systems (floor as well as ceiling heating, radiant panels, convection heaters, ladder radiators, etc.) A Watts GSM module NEED to be connected to the V24 unit, enabling basic control of the heating system via short text messages (SMS) to use this app.
SMS Asistan is an IOS application for our GSM Relay Controller Devices like BQ100, BQ101, BQ110etc. GSM Relay Devices can control any device that you have connected to its relay outputs with SMS. This application helps you to send SMS.
EasyStart GSM is a remote control for your Eberspcher branded vehicle heater. This application requires EasyStart GSM unit. Features:- Start heater- Stop heater- Start heater at a given time- Get current temperature in GSM unit