OTOSAVER Smartphone App!

[Main Features]1. Lives - You able to check real-time recording for both front and rear2. - Impact sensor sensitivity setting - Voice guidance ON/OFF setting - Voice recording ON/OFF setting - Parking lamp ON/OFF setting - Power disconnect setting - Parking recording mode ON/OFF setting - Auto reboot setting - Wi-Fi Password setting - SD card format setting

OTOSAVER Smartphone App alternatives


CirclesCare is a one-stop-shop application for easy management and cusomization of your Circles. Life mobile plan. Life

  • size 96.0 MB

ZY Play

ZY Play offers comprehensive camera controls for convenient photo & video shooting, combining various intelligent functions including time lapse, long exposure, slow motion and more to inspire your creativity. With easy-to-use design and a vast range of editing features, it is a must-have app for anyone who takes photos & videos. By conneting the APP to a ZHIYUN professional stabilizer, it helps you create film-grade footage that is once only possible with a crew.

  • rating 3.2
  • size 71.0 MB

Singtel Prepaid hi!App

More alternatives


This APP is dedicated to XL Go MiFi of XL Axiata. With it, it is easy to check and control XL Go MiFi, such as data usage checking, Wi-Fi connected user information checking, network connecting status, XL Go MiFi battery, Sim Card number, Wi-Fi user name and password setting and checking, network connection control, Wi-Fi Disk(SD storage) read & write, and so on. This APP is for XL Go MiFi users only.

  • size 33.9 MB
  • version 1.0

Pyle IP Cam

Take control and monitor camera locations right from your smart device with the Pyle IP Cam app. Connect with your Pyle PIPCAM Series Wi-Fi Camera to unlock even more digital monitoring capability. Quick Start Guide:Setup and Installation- Connect the power adapter to the PIPCAM- Connect the network cable from your modem to the PIPCAM- Upon initial startup, the PIPCAM will take 1 minute to boot upConnecting to the Pyle IP Cam App- Download and install the app- Tap the Add Camera icon- Tap the QR Code to connect the PIPCAM to your device (This will open your devices camera; snap a picture of the QR code located on your PIPCAM)- If prompted, enter the default password 000000 (six zeros)Wi-Fi Setup:- Make sure the antenna is connected to the PIPCAM- Run the Pyle IP Cam app on your device and tap Cameras- Tap the arrow on the right hand side of the added PIPCAM and goto Advanced Setting- Scan for available Wi-Fi networks and connect- The PIPCAM will then reboot; it will disconnect and reconnect via Wi-Fi- After the reboot, you can disconnect the network cable

  • size 23.8 MB
  • version 1.7


The most convenient application for IROAD SMART MANGER Wi-Fi ever IROAD driving recorder, it contains many convenient features like playback, preference settings, backup, software upgrade etc as well as real-time streaming - Real-time streaming : Front/rear Confirm whether recording is working, help to set view angle- Playback : Enjoy Front/rear recorded play video, You can choose event or normal recording folder- Backup : Provides backup AVI format. Lets save this backup file to your smart device- Screenshot : Just make screenshot whenever you want, it provides screenshot function whenever like real-time streaming or playback in its both mode- Setting user Preferences : resolution and frame, time, sensitivity, product volume, Battery prevention system(Uninterrupted recording function) and other information- Firmware Upgrade : Upgrade latest firmware and software automatically whenever it connects the internet

  • size 74.3 MB
  • version 1.6.6

Tenda Link

Manage your Mi-Fi and network conveniently and efficiently via your connected smart phone or tablet. (Supports Tenda Mi-Fi: 4G185)Connect the 4G185 Wi-Fi via scan QR code;Check Mi-Fi carrier informationCheck Mi-Fi data traffic packet usage information; Check Mi-Fi current upload and download speed anywhere; Check Mi-Fi battery life;Display the connected device and relevant information. Features-Scan the two-dimensional code on screen of 4G185 then automatically connected to the WIFI (Double press WPS button then display code on screen).-Check the current data traffic packet usage - View the number of wireless terminals connected to the device and relevant information; - Enable Micro SD memory card sharing management;- Sharing MICRO SD memory card content that you inserted the 4G185; share with photo, video, music in WLAN;-Upload and download the files between Micro SD memory card with your connected smart phone and tablet;- Change Wi-Fi SSID and password;- Enable roaming service.-Set data traffic packet threshold-Reset or reboot the router.

  • size 5.6 MB
  • version 1.0

Blaupunkt DVR BP9.0A

Blaupunkt DVR BP9.0A, being Your extra eye on the road, is an easy access app to your Blaupunkt DVR BP9.0A via Wireless Connection. This app allows you to control : Real-time recording Configuration setting Playback / download /delete video Update firmware Set passwordWireless-control Connection Steps : Download this app after purchasing dashcam Blaupunkt DVR BP9.0A Ensure Wireless-control dongle is connected to dashcam via USB port and smartphone Wi-Fi is turned on Tap left side of the dashcam display screen to enter into main menu Select MENU SYSTEM SET Wi-Fi TURN-ON Next, search and connect to dashcams Wi-Fi (Refer to Wireless-control dongle packing for Wi-Fi name)Benefits : Instant online upload or share using your smartphone anytime, anywhere Real-time recording control Easy setting access Instant download or video delete using smartphoneRemark : Compatible with Blaupunkt DVR BP9.0A only Distance between dashcam (with Wireless-control dongle) and smartphone is approx. 10M in an open field Users are recommended to change password during first connectionContact information : Facebook : Blaupunkt Car Entertainment-Asia Pacific Competence Centre Email : [email protected] Website : www.blaupunkt.com

  • size 29.1 MB
  • version 1.2

Record Screen & Broadcast Live

This app records your screen and allows you to play music, draw on the screen, turn flash on or off, and much more. Also a secondary feature allows you to use Periscope or Mobcrush to record the screen live while using these great features for only $0.99 FEATURESRecord screen Or use either Periscope or Mobcrush to broadcast the screen liveDraw on the screenAbility to turn the flash on or off whenever you wantShow current location Change from the front camera to the back with the touch of a buttonCan turn camera off and draw on sketch padPlay music from your music libraryUse the mic to provide commentary Comes with auto focusAlso can zoom in and out by pinching the screenCan watch replay of recording in the Periscope appReally easy to use interface. Compatible with iPhone 5s, iPhone 6, iPhone 6 Plus, iPhone 6s, iPhone 6s Plus, iPhone SE, iPhone 7, iPhone 7 Plus, iPad Air, iPad Air Wi-Fi + Cellular, iPad mini 2, iPad mini 2 Wi-Fi + Cellular, iPad Air 2, iPad Air 2 Wi-Fi + Cellular, iPad mini 3, iPad mini 3 Wi-Fi + Cellular, iPad mini 4, iPad mini 4 Wi-Fi + Cellular, 12.9-inch iPad Pro, 12.9-inch iPad Pro Wi-Fi + Cellular, 9.7-inch iPad Pro, 9.7-inch iPad Pro Wi-Fi + Cellular, and iPod touch (6th generation).

  • rating 2.22222
  • size 23.3 MB
  • version 1.2

iPlug Wi-Fi

The iPlug is a Wi-Fi power monitor that allows you to have a real-time feedback of power and energy use of any appliance plugged into it. IMPORTANT - Requires separate hardware available from http://www.aginova.com to operate Features:- Monitor in real-time - directly from your iPhone/iPod Touch/iPad - the power consumption of the appliance connected to the iPlug.- Easy to configure: either set the iPlug as a soft AP that your smartphone or tablet connects to, or simply connect it to your existing Wi-Fi infrastructure.- Save power by remotely turning on/off the appliance plugged into the iPlug. The App allows to visualize the following data:- Active Power of sensor selected [W]- Total Active Power of all sensors connected [W]- Energy 1-hour, 1-day, 1-month [Wh or kWh]- Energy counter [Wh or kWh]- Vrms [V]- Irms [A]- Frequency [Hz]- Power Factor (cos phi)

  • size 5.8 MB
  • version 1.0.1

Panasonic Stereo Remote 2012

Panasonic Stereo System Remote 2012 is free and easy-to-use application for compact stereo system SC-HC58, SC-HC57 and SC-AP01. Wherever you are in your home, you can control your stereo system with a tap or flick of a finger over your wireless network (Wi-Fi). Features - Control Panasonic Compact Stereo System SC-HC58, SC-HC57 and SC-AP01 from your iPhone or iPod touch from anywhare in your home - Sound adjustment, volume control, mute operation - Turn power on/off, selector change, playback control, various setting operations (SC-HC58 and SC-HC57) - Door open/close control (SC-HC58 and SC-HC57) - Turn power on/off, net standby setting, auto off setting (only SC-AP01)

  • size 13.7 MB
  • version 1.1.2

Voice Recorder , voice memo

Voice Recorder is an easy voice recorder. One Touch Recording,.One Touch Stop & Save,.Storing recording both in raw and mp3 format,.Voice memos,.voice email,.Easy to use ,.Voice iCloud,.Voice Recorder free is Simple and user-friendly, .It is working offline completely with no ads,.Recording Unlimited (not included in the price).Voice Email Up to 5MB ,.Record Timer & Playback Counter ,.Auto File Naming ,.Displays File Sizes and Time Stamps,.Supported recording in background,.Memos you record can also be transferred to your Mac or PC Via USB(itunes file sharing).Scan fingerprint for more security files (touch ID),.Sticker Color For Searching easy your files3D Touch Support. Help Section in different languagesHOW TO TRANSFER Memos You voice TO MY COMPUTER?1- Connect your iPhone/iPod to iTunes2- Select your device in iTunes on the left3- At the top click on the Apps tab4- Scroll down and select the app My Voice Record on the left5- Your voice memos will appear on the right, just save them in any folder you want

  • rating 4.56303
  • size 3.1 MB
  • version 2.2

i-Tech Tank

Control the toys by P2P/Lan.1.Open the Tech Tank Power, Listen Waiting for config.2.Open the IPhone Setting/Wi-Fi,then connect to SSID below the Tech Tank.3.Open the i-Teck Tank App ,config the tank follow the infomation, or click the Lan Control on the home page to direct control the tank.4.Click the internet control ,input the remote id,userand password,then click the Go.5.Control the tank anywhere, and Video,Speak,Photo,change resolution etc.

  • size 28.9 MB
  • version 1.34

GPS Monitor Tracking

Model GPS - GT02Functions: - Small size, internal GPS and GSM antenna, and easy to install - Double location modes: GPS and LBS (Location Based Services) - GPS data uploading at interval and rollcall function - Tracking by SMS, and reply English address - Data re-sent from signal dead zone function - Geo-fence alarm - Domain name setting, remote updateModel GPS - GT08Functions: - GSM 850/900/1800/1900 Quad band - Wide for voltage input range: 9-36vDC - GPS continuous positioning, GPRS timing interval - Check location via SMS - Real-time tracking and upload location information - ACC detection and upload vehicle status - Access location information via SMS or GPRS(TCP) - Built-in CPU, eliminating breakdown automatically - Built-in high sensitive GPS chipset - Relay for tele-cut off fuel/power - Built-in ON/OFF power, wide input voltage range - External MIC for voice monitoring -Three LED indicators for displaying working status - Built-in GSM & GPS antenna - Built-in acceleration sensor for vibration alarm - Built-in 450mAh battery for alarm when power supply is disconnected unexpectedly - External SOS button for emergency alarm - Check location via platformModel GPS - GT100Functions: - GPS+GSM+GPRS wireless network - Built-in high sensitive MTK GPS chipset - AGPS fast locating function - Built-in GPS & GSM antenna - Support ACC detection - Built-in acceleration sensor for vibration alarm - Tele-cut off (petrol/power) function - Low voltage protection - Built-in 800mAH battery - IP65 dust and water proofEX 5081. Small size and easy for installation2. Domain name setting, remote updateNote : Continued use of GPS running in the background can dramatically decrease battery life

  • size 69.8 MB
  • version 2.5

TripREC Driving Recorder Lite

Simple and convenient driving recorder software for iPhone TripREC, a kind of video recording software, is specially designed for drivers and people who are crazy for traveling. It can not only make your iPhone suddenly work as a powerful video recorder, but also record important information such as your vehicle routing, location, mileage and speed and so on. - Able to play background music in the process of recording.- Map display on/off switch available.- Mute shooting available.- iPhone flash available.- The camera fixed focus available- Simple and convenient for the video and road inquiry.- Multiple video export modes: camera roll, Email, Wi-Fi and iTunes etc- Exported video important information including time, speed and location etc- Able to export KML format line and be viewed via Google Map software.

  • rating 4.5
  • size 22.2 MB
  • version 2.3.1

F65Remote Look Plus

F65Remote Look Plus is an application for remote control of SONYs digital motion picture camera F65 via a Wi-Fi network.> Supported Cameras F65 V4.0 (with CBK-65EL upgraded kit) and later.> Main Features- Control: This screen emulates the inside panel of camera and displays SR-R4 status.- File List: You can select and control files in SRMemory.- Slate: You can see and edit clip metadata.- Menu: All camera settings except for network can be performed. Help function allows you to read a help text of each menu items while setting.- Output Signal Map: Specialized menu screen for setting VF and SDI-OUT1/2 enables you to operate intuitively.- ASC CDL: This function offers the ASC CDL controls for color grading on the set.- Export: Once you save ASC CDL files/File List data, they can be exported or emailed as CDL/CSV format. For more details, please read Menu Operation using a Tablet Device page in F65 operation manual.

  • size 30.8 MB
  • version 4.20


BLE TPMS (Bluetooth Low Energy Tire Pressure Monitoring System) App provides driver to get the real-time tire pressure data, temperature data and status through iPhone. It will detect the abnormal status and use voice/audio to alert driver and show the abnormal data and tire location on BLE TPMS APP. The Features as following:1.Easy to use no cable required and extra monitor device,and provide a safe and comfortable environment for the driver.2.Real-time check tire pressure and temperature alerting the driver with both visual and audible alerts if one or more tires pressure out of setting range.3.Sensor ID learning: Auto,Manual learning and QR code scan.4.Tire location change.5.Tire pressure Unit:psi,kPa,Bar; Temperature unit:, ; Temperature/Pressure limit setting.6.Background mode use.Continued use of GPS running in the background can dramatically decrease battery life.

  • size 59.9 MB
  • version 2.0.2


LifetronsAir is an application software which can manage your documents, music, movies and photos via Wi-Fi connection, USB flash drive or portable hard-disk after pairing your mobile devices with the Lifetrons Power Solution Wi-Fi Router & Charger (Model FG-1060N).Important:In order to use the LifetronsAir application with your iPad or iPhone you need to purchase the Lifetrons Power Solution Wi-Fi Router & Charger in advance (Model FG-1060N). Supports both iPhone and iPad with iOS platform 4.0 and above Supports multiple languages based on your mobile device language preferences (including English, German, French, Spanish, Italian, Chinese, Japanese and Korean) Automatically detects and connects to your USB flash drive or portable hard-disk Supports network and parameter settings Integrated keyword search function Browse, edit or delete files located on your iPhone, iPad, USB flash drive or portable hard-disk Download or upload files between your USB flash drive or portable hard-disk and your iPhone or iPad Supports copying and opening files in other applications Supports file lists, thumbnail views, thumbnail image shows, MP3 artwork (ID3) shows and the gravity sensor (switch direction) Upload photos and videos recorded on your iPhone or iPad to your USB flash drive or portable hard-disk to create more space Supports e-mail function for documents Stream music, photos and videos from your USB flash drive or portable hard-disk to iPhone or iPad via Wi-Fi connection (Decoding ability depends on the system, file format depends on the software installed on your device; we suggest to use Oplayer) Supports e-mail, saves photos and uploads photos to Facebook Supports photo slideshows and background music File formats supported: txt, pdf, doc, xls, ppt, pages, key and more

  • size 12.6 MB
  • version 1.3.466

Fusion Voyager

Fusion Voyager is an extension of the Dolbey Fusion Suite dictation, transcription, and speech recognition platform to support iOS mobile dictation. This application allows clinicians to securely create dictations and transmit them to a Fusion dictation server for transcription or speech recognition. Requirements:* Fusion Text or a Fusion Voice system with the Fusion Voyager server module* User name and password (assigned by your organizations Fusion Voyager server administrator)Features:* Download a schedule of patients from the Fusion server * Manually enter patient demographics or scan a barcode to capture information* Automatically and reliably transmit dictations over cellular or Wi-Fi networks* Easy to use interactive sound recording graph* Capture dictations while connected to Fusion server or offline* Option to save dictations as drafts* Option to flag dictations as priority to expedite the routing to transcription* High quality dictation recording format for optimal listening clarity and back-end speech recognition* Configurable dictation prompts (i.e. work type, department, and location)* Group settings and security options configurable from the Fusion Voyager server module* HIPAA security features include: user name and password authentication, inactivity timeouts, auto lock-outs, complex password options, encrypted local storage (AES 256) and encrypted transmission over the network (SSL + AES 256), uniquely assigned user encryption keys, device connection authorization, and device audit trails

  • size 8.1 MB
  • version 9.0.0

FlyToDiscover - Bebop

Fly to Discover allow you to control your Parrot Bebop, Bebop 2, FTD300X and Super300 thanks to fabulous functions such as:Main features:- Now with SKY CONTROLLER 2 support - PANORAMA create fabulous 360 picture with your Bebop- MULTIMEDIA for managing your bebop memory- VOICE CONTROL to control your bebop with your voice- Translated in English, Italian, Portuguese, French, Spanish, German and Romanian- Integrated 2D simulator to fly even when the weather does not allow it. You can familiarize yourself with all the functions of FTD without reading boring manual and without having to connect your Bebop.- Exclusive compatibility with Apple Watch Control your Bebop with your wrist - Control via analog sticks for precise driving experience at all times- Simple and intuitive graphics, cockpit customizable pull-down menus and draggable items- Compatible with Parrot SkyController and SkyController 2- Magnetometer calibration tool for Bebop and SkyController- Detailed picture settings menu for optimum results- Dynamic charts in real time: battery, altitude, speed and distance- Photo mode (DNG, JPEG 4: 3, 16: 9, Fisheye), Video mode, Time Lapse, Photo Panoramic 360- Map mode with FPV box- Localization Bebop compared to the pilot (Radar)- Follow Me Mode (Bebop follow you at a distance and height adjustable) with block angle (Bebop follow you at the same angle)- Orbit Me (Bebop will make a circle around you at a distance and adjustable speed)- Flight time and time of video recording- Return to home in case of radio signal loss or pressing appropriate button- Selection of piloting modes: Mode 1, Mode 2, Mode 3, Mode 4- Selection of flight parameters: maximum inclination, tilt speed, maximum vertical speed, maximum rotation speed- Selection of banked turn- Warning messages with vibration (optional)- Selection of flight limits: max altitude and max distance- Pause time before RTH- RTH location: takeoff or pilot- Network settings: change your Bebop name, changing country, auto or manual band (2.4GHz-5GHz), wi-fi channel with free channels and setting wi-fi password to make sure your Bebop- Function VR with deactivation video stabilization of Pitch and Roll for a VR experience even more real- Band, channel and name selection of SkyController- Compatible with iOS MFi Bluetooth Controller: Nimbus, Mad Catz, Moga rebel and others- Move the framing of Bebop dragging two fingers on the screen- Automatic recording of all flights, and section to review all the details- Function Find my drone, in case you lost your drone you can easily find it again with this function- Successfully Tested with wi-fi extender

  • size 79.3 MB
  • version 1.5.0