This application provides a simple and efficient way of sending or receiving OSC protocol of the data to the network and equipment through wifi.
Control Arduino, Raspberry Pi, ESP8266, ESP32, Particle Photon and Electron, and many other microcomputers with an iPhone? Building a smart home or robot? Happy Blynking
TuioPad is an open source TUIO tracker for iOS devices such as the iPad, iPhone and iPod touch, which allows multi-touch remote control based on the TUIO protocol. This app is available free of charge and can be used in conjunction with any TUIO enabled client application. You can find further information about the TUIO protocol and the various TUIO enabled application environments at the TUIO.org portal.
* This app requires a Raspberry Pi with installed Camera Module to work *Use your iOS device to control the Raspberry Pi camera module. Control exposure modes, special effects for still images with the simple interface - no need to learn complex SSH commands. A great way to experiment with the possibilities of the Raspberry Pi camera or to kickstart that IoT project you always wanted to do.
QLab Remote is the official iOS companion app for remote control of QLab, the award-winning live show control software for macOS. QLab Remote requires QLab 3 or later. * Note: Some features require QLab 4.0 or later.
EasyPinger is a tiny little app that was designed to be the easiest way to check your devices connectivity status. Just open it up whenever in doubt to see if your Wi-Fi or cellular data connection behaves correctly it will refresh connectivity status every time you open it, also regularly while open, or if you just tap the screen. EasyPinger uses the same old Ping/ICMP to check connectivity with a server that is assumed to be always available, but simplifies the process by requiring no extra actions from you to perform a simple connection test.
This is a used keloled UDP data transmission module of WI-FI software, the user control the keloled by the software. The application through the WIFI tothe network and send UDP data communication protocol, simple , and easy to user.
MaxComm is a free customizable controller for sending OSC messages to another computer over a Wifi network. The app incorporates an interface builder, which allows the user to add sliders, buttons, and toggles. MaxComm was designed for use with Max/MSP, but should be able to function with any program capable of receiving OSC messages via a UDP connection.
This is a used hisea UDP data transmission module of WI-FI software, the user can send UDP data by this software. The application through the WiFi to the network and send UDP data communication protocol, simple, and easy to use.
This is a used hisea UDP data transmission module of WI-FI software, the user can control the hisea by this software. The application through the WiFi to the network and send UDP data communication protocol, simple, and easy to use.
The Meter Scanner application is used to scan QR codes associated with various types of power meters and industrial equipment, which are not directly connectable to the Internet. This application provides a secure means to enter data associated with consumption meters and equipment through your Iphone or Ipad, which automatically sends this information to the Entronix Energy Management Platform.
HD SEE application software, is a combination of WiFi image transmission equipment using the software, with WiFi settings to achieve the camera through wireless WiFi and IOS system terminal equipment connection of application software, allows users to truly achieve anytime, anywhere, free wireless transmission of image data. WiFi wireless image transmission is mainly used for toys, aerial photography, monitoring, piping, industrial endoscope mirror detection, medical testing, wireless reversing camera, etc., in does not need to be disassembled or damaged assembly and equipment to stop running to achieve non-destructive testing. To achieve internal detection or graph transfer pictures, video.
WiFiCast is an application that enables us to communicate in a way similar to the walkie-talkies using different devices connected to the same wifi network. To do that it uses multicast, a transmission data protocol that allows us to send data from an emitter to many receivers in a way that the network traffic is not dependent on the number of receivers. If we want to completely stop the service we will have to go to the application and push the exit button.