The Zone Control app allows for the monitoring and controlling of Mitsubishi Electric Cooling & Heating systems. This level of access can be utilized by building or campus managers, maintenance personnel, building owners and homeowners to name a few. Network settings may vary from locations so check with your administrator for any login information that might be needed to access the LAN.Each indoor unit can be monitored and controlled in terms of:On/offModeSet temperatureSpace temperature (monitor only)Fan speedVane directionZone Control is configured through menu-driven settings that support the following:Multiple locationsMultiple controllers per locationCustomizable names for indoors units(setup may need to be done with support from the installing contractor to create the network access point or assign the indoor unit location names)Note: You must press the Refresh button when you are viewing the controllers to update the indoor units settings.

Mitsubishi Electric Zone Control alternatives

CoolRemote

PLEASE NOTE*: Requires CoolMaster, CoolMasterNet or CooLinkNet HVAC bridge with internet access for operation CoolAutomation CoolRemote app makes you VRV / VRF, Splits, Multi-Splits, Mini-Splits air conditioning smarter and more accessible and its Free* Monitor and Control HVAC (airconditioning) units Direct bi-directional access to HVAC internal communication lines Full control over your indoor units; On/Off control (individual or All) Set Temperature and Room temperature info HVAC Operation modes (Cool / Heat / Fan / Dry / Auto), Fan speed controls. Louver modes control Robust and easy to use Scheduler function, unlimited actions Diagnostics and realtime manufacturer errors notifications with fault codes Advanced checker and stats functionality for HVAC technicians Plug and Play setup and installation Supports Splits, Multi-Splits, Mini-Splits, Ducted, VRV, VRF HVAC system types HVAC Manufactures Compatibility: Daikin Fujitsu (General) Gree Hitachi LG Mitsubishi Electric (MELCO) Mitsubishi Heavy Panasonic Samsung Sanyo Toshiba Midea Trane Kentatsu Multiple locations per user Multiple controllers per location* Please Note: Requires CoolMaster, CoolMasterNet or CooLinkNet HVAC bridge with internet access for operation. Also Supports all leading Home Automation / BMS (Building Management) systems (AMX, Auluxa, Beckhoff, Bticino, CD-Innovation, Control4, Crestron, CUE, Demopad, Domintell, ELAN, Fibaro, HDL, i2, iRidium, KNX, Legrand, Leviton, Lutron, NESS, Niko, Phillips Dynalite, Push, RTI, Savant, Schneider Electric, SmartBus, Teletask, Unitronics, Vantage).For More info please visit us http://coolautomation.comor drop us a line at [email protected]

  • rating 4.14286
  • size 1.6 MB

Fanfare HVAC Lite

Fanfare Lite by Silverglance Software enables rapid sizing of low-volume flowrate (up to 2200 cfm / 1 m3/s) HVAC ducts in a wide range of ductwork types and materials. Fanfare Lite can be upgraded to remove flowrate and duct material restrictions. Fanfare operates in either metric or imperial units and uses either UK or USA calculation methods.

  • size 2.3 MB

Mitsubishi Road Assist

Now you can drive with added peace of mind. If you ever experience a flat tire, a vehicle lock-out, an empty fuel tank, or require a tow due to a mechanical failure, Mitsubishis free Road Assist iPhone app will put you directly in touch with a professional trained to dispatch reliable roadside assistance to you, 24/7/365. Download Mitsubishis free Road Assist iPhone app today and drive anywhere with added confidence.

  • size 18.7 MB

HVACR Fault Finder

HVACR Fault Finder 2.0 from Emerson Climate Technologies provides on-site compressor troubleshooting for air conditioning and refrigeration applications. This app allows contractors to easily access compressor electronics product specifications along with the ability to interface with and diagnose the system. EmersonClimate.com/mobileapp

  • size 103 MB