This app provides, for the current weather conditions and a given engine configuration (engine model, floats, etc. ), four jetting recommendations for TM K9, K9B, K9C, KZ10, KZ10B and KZ10C engines that have DellOrto VHSHS30 carbs. Depending of the track type, the jetting setups will be adapted.- GPS: This tab allows to use the location service (using GPS or WiFi) to get the current position and altitude, and connect to an external service to get the weather conditions of the nearest weather station (temperature, pressure and humidity).The app let you use different measure units: C y F for temperatures, meter and feet for altitude, and mb, hPa, mmHg, inHg y atm for pressures.

#

Similar Apps

1
Jetting for Modena KK1, KK1R & MKZ KZ Kart
2
Jetting CR125 Shifter Kart - Setup & tuning for Honda CR125 kart engines
3
Jetting for Vortex RVS, RVX, RVXX, RVZ & RKZ Kart
4
Air Density Meter & Density altitude calculator
5
Jetting Max Kart for Rotax Max
6
Jetting for Yamaha KT100 Kart
7
Jetting Max Kart for Rotax Max EVO
8
Baro - atmospheric pressure
9
Jetting for IAME KZ Kart
10
Jetting for IAME kart engines
11
Jetting for Husqvarna TC, TE & TX 2T
12
Weather Reminder Plan.Check.Do
13
Galileo Thermometer
14
Jetting for Suzuki RM two strokes motocross, SX, MX or supercross, off-road race bikes - Setup carburetor without repair manual
15
Jetting for KTM SX, EXC, XC & MX 2T

Jetting TM Kart for KZ10 (B,C) & K9 (B,C) engines alternatives

Pocket MGP 2017 (with Push Notifications)

Pocket MGP: MotoGP in your pocket 5 YEARS of Pocket MGP THANK YOU NEVER MISS RACE RESULTS GET NOTIFIED INSTANTLY WITH PUSH NOTIFICATIONS Pocket MGP keeps you informed on news and events of the MotoGP charming world. A simple and user-friendly graphic lets you see: - Starting time (in your local time) of every session, for every season event- Session results for every event- Riders standing- Riders information, with complete Wikipedia profiles- Circuits information and track map- Complete MotoGP regulations- Constantly updated newsInformation content is automatically updated provided the app is launched when an internet connection is available. Afterwards, standings, news headlines and results are stored and can be consulted at any time, also offline.

MYLAPS Speedhive

MYLAPS Speedhive App - Live Timing and official race results in one app. The free MYLAPS Speedhive app gives you quick access to the official results of motorized sport events and with the free introduction version of Live Timing spectators and fans can follow races all over the world. MYLAPS Speedhive is a service from MYLAPS Sports Timing

  • rating 4.0
  • size 61.0 MB

CMS Lap Timer

The Cantrell Motorsports Lap Timer is the app for the race track enthusiast seeking to improve via learning and sharing. This is the easiest to use GPS-based lap timer, data recorder, video recorder, and performance analysis app available for iOS devices. Refer to the user guide for additional information:http://cmslaptimer.com Also Available: CMS Lap Timer Pro for iOS CMS Lap Timer Pro includes all the features above that are in-app purchaseshttp://cmslaptimer.com/products.html

  • size 18.5 MB

TrackAddict

Smartphone Race Timing and Video+Data Acquisition Made Easy Road Course, Autocross, Rally, Drift, and Drag Racing Race Timing + Data Logging + Analysis + Video Works Almost Anywhere 850+ Recognized Circuits, or Add Your Own GPS Lap Timer & Display with Predictive Timing (Circuit mode) High-Definition Video Recording & Multiple Video+Data Overlay Options Lap, GPS, G-Force, and OBD-II Data Logging Driving Line Analysis, Statistics, and Run / Lap Comparison Optional Live Telemetry Streaming via Live. RaceRender.com (requires upgrade) Also Supports External GPS and OBD-II Devices OBD-II Live Monitor, Code Scanning / Reset, and Data Logging Easily Exports Data and Video to RaceRenderTrackAddict, by HP Tuners, transforms your iPhone, iPad, or iPod touch into a motorsports telemetry and video system. Continued use of GPS running in the background can dramatically decrease battery life.

  • rating 4.25
  • size 27.9 MB

Harry's LapTimer Petrolhead

Harrys LapTimer is the advanced tool for car enthusiast. It records all types of sensor data provided by your iPhone/iPod/iPad (or external sensors), combines them, and makes them available to optimize your drive. Join our user community on http://www.gps-laptimer-forum.de to be involved in future development - all with first class support.

  • size 75.9 MB

More Information About alternatives

Jetting for Modena KK1, KK1R & MKZ KZ Kart

Jetting for Modena KK1, KK1R & MKZ is an application which provides, for the current weather conditions and a given engine configuration (engine model, carburetor, floats, track shape, etc. ), a jetting recommendation for go-karts with Modena KK1, KK1R and MKZ engines (ICC / KZ1 / KZ2 karting engines). Depending of the track type, the jetting setups will be adapted.- GPS: this tab allows to use the GPS to get the current position and altitude, and connect to an external service to get the weather conditions of the nearest weather station (temperature, pressure and humidity).The application works with different measure units: inHg, mb, mmHg, hPa, atm for pressure, C and F for temperature.

  • size 3.5 MB
  • version 1.2

Jetting CR125 Shifter Kart - Setup & tuning for Honda CR125 kart engines

This app provides, for the current weather conditions and a given engine configuration (air filter type, pump type, etc. ), a jetting recommendation for Stock Moto / Mod Moto shifter karts with Honda CR125 engines that have Keihin PWK 38 or PWM 38 carbs. Depending of the track type, the jetting setup will be adapted.- GPS: This tab allows to use the location service (using GPS or WiFi) to get the current position and altitude, and connect to an external service to get the weather conditions of the nearest weather station (temperature, pressure and humidity).The app let you use different measure units: C y F for temperatures, meter and feet for altitude, and mb, hPa, mmHg, inHg y atm for pressures.

  • size 3.2 MB
  • version 1.4

Jetting for Vortex RVS, RVX, RVXX, RVZ & RKZ Kart

Jetting for Vortex RVS, RVX, RVXX, RVZ & RKZ is an application which provides, for the current weather conditions and a given engine configuration (engine model, carburetor, floats, track shape, etc. ), a jetting recommendation for go-karts with Vortex RVS, RVX, RVXX, RVZ and RKZ engines (ICC / KZ1 / KZ2 karting engines). Depending of the track type, the jetting setups will be adapted.- GPS: this tab allows to use the GPS to get the current position and altitude, and connect to an external service to get the weather conditions of the nearest weather station (temperature, pressure and humidity).The application works with different measure units: inHg, mb, mmHg, hPa, atm for pressure, C and F for temperature.

  • size 3.8 MB
  • version 1.0

Air Density Meter & Density altitude calculator

This app provides the air density, density altitude, relative air density, dew point and relative horsepower. The input data can be automatically obtained from the GPS and the nearest weather station or manually introduced. The values of this screen can be manually set or can be loaded by the application reading the data from the nearest weather station (from the GPS tab).- GPS: This tab allows to use the location service (using GPS or WiFi) to get the current position and altitude, and connect to an external service to get the weather conditions of the nearest weather station (temperature, pressure and humidity).The app let you use different measure units: C y F for temperatures, meter and feet for altitude, and mb, hPa, mmHg, inHg y atm for pressures.

  • size 3.3 MB
  • version 1.6

Jetting Max Kart for Rotax Max

This app provides, using temperature, altitude, humidity and atmospheric pressure values, a recommendation about the jetting configuration and spark plug to use for Rotax Max Senior, Supermax, DD2, Junior, Minimax or Micromax. In order to get the weather values, the application can use the location service (GPS or WiFi) to obtain the position and altitude, and the network connection to get the temperature, pressure and humidity from the nearest weather station. The values of this screen can be manually set or can be loaded by the application reading the data from the nearest weather station (from the GPS tab).- Engine: you can set in this screen the information about the engine and the track, that is, the engine type (Senior, Junior, Minimax, Micromax, Supermax or DD2), the spark plug brand used, the needle type, the float/pilot jet combo, the float height, airbox type (new model or the old square model), track type (with long, short or medium straights), oil mix ratio and venturi type (12.5 or 8.5).- GPS: This tab allows to use the location service (using GPS or WiFi) to get the current position and altitude, and connect to an external service to get the weather conditions of the nearest weather station (temperature, pressure and humidity).The app let you use different measure units: C y F for temperatures, meter and feet for altitude, and mb, hPa, mmHg, inHg y atm for pressures.

  • size 3.7 MB
  • version 1.6

Jetting for Yamaha KT100 Kart

This app provides, for the current weather conditions and a given engine configuration (engine model, gas, etc. ), a jetting recommendation for Yamaha KT100 engines. The application works with different measure units: inHg, mb, mmHg, hPa, atm for pressure, C and F for temperature.

  • size 3.4 MB
  • version 1.1

Jetting Max Kart for Rotax Max EVO

This app provides, using weather conditions and your engine configuration, a recommendation about jetting and spark plug to use for karts with Rotax Max EVO (Senior, Minimax, Micromax, Supermax, DD2 or Junior), which use a Dellorto VHSB 34 XS carb. In order to get the weather values, the application can use the GPS to obtain the position and altitude, and the network connection to get the temperature, pressure and humidity from the nearest weather station. For these engines, you should install Jetting Max Kart.

  • size 3.3 MB
  • version 1.4.1

Baro - atmospheric pressure

This app uses built-in pressure sensor in iPhone 6 to display real time readings for atmospheric pressure and altitude. FEATURES: - reports atmospheric pressure in the range of 300 to 1,100 hPa (8.85 to 32.45 inHg)- selectable display units: kPa, hPa, mmHg, inHg, psi, mbar- reports altitude in the range of -700 to 9,000 meters (-2,296 to 29,520 feet) - selectable display units: meters or feet- altitude calibration using known elevation or mean sea level pressureIMPORTANT: In order to obtain accurate altitude readings it is necessary to calibrate the altimeter prior to useNOTE: This app only works on iPhone 6/6 plus

  • size 9.3 MB
  • version 1.3

Jetting for IAME KZ Kart

This app provides, for the current weather conditions and a given engine configuration (engine model, carburetor, floats, track shape, etc. ), a jetting recommendation for go-karts with IAME Screamer, X30 Shifter and 175 cc Super Shifter engines (ICC / KZ1 / KZ2 karting engines). The values of this screen can be manually set or can be loaded by the application reading the data from the nearest weather station (from the GPS tab).- Engine: you should set in this screen the information about the engine and the carburator (Dellorto VHSH 30 / VHSB 36 RD), that is, the engine model (IAME Screamer, X30 Shifter and 175 cc Super Shifter), the float type and height, the oil mix ratio and the type of the circuit (sprint or road racing, short or long).

  • size 4.0 MB
  • version 1.1

Jetting for IAME kart engines

This app provides, for the current weather conditions and a given engine configuration (engine model, gas, etc. ), a jetting and exhaust length recommendation for IAME Parilla X30, X30 Super 175cc & Leopard engines. The values of this screen can be manually set or can be loaded by the application reading the data from the nearest weather station (from the GPS tab).- Engine: You must set in this screen the information about the engine, that is, the engine type (Leopard, X30, X30 Super), the oil mix ratio and the type of the circuit (short or long tracks).

  • size 3.7 MB
  • version 1.4

Jetting for Husqvarna TC, TE & TX 2T

This app provides, using temperature, altitude, humidity, atmospheric pressure and oil-mix ratio, a recommendation about the jetting configuration to use for Husqvarna 2-strokes MX and enduro bikes (TC, TE and TX models).In order to get the weather values, the application can use the location service (GPS or WiFi) to obtain the position and altitude, and the network connection to get the temperature, pressure and humidity from the nearest weather station. Nevertheless, the application can run without GPS, WiFi and internet connection, in this case, the user has to give the weather data. If you click in More from developer you can find the other carburation tools for 2 strokes & 4 strokes motocross, SX, MX, enduro, supercross, off-road race motorcycles: KTM, Yamaha YZ, Suzuki RM, Honda CR, Honda CRF, Kawasaki KX.The app is valid for both PRO or beginners dirtriders.

  • size 3.9 MB
  • version 1.0

Weather Reminder Plan.Check.Do

There is no need to monitor the weather forecast minute by minute. You just set up weather reminders manually, or choose an example from our templates. temperatures, feels like temperature, humidity, atmospheric pressure, UV-index, cloudiness, precipitation amounts and their probability, wind speed and direction for every day* Sun and moon data (dawn / sunrise / sunset / dusk / moonrise / moonset / full moon / new moon / phases of the moon), daylight hours* Fahrenheit/Celsius; hPa/mmHg; km/h, m/s, feet/s, miles/h* Select a specific day and hour to see extended meteo data

  • size 48.2 MB
  • version 2.0.1

Galileo Thermometer

A virtual Galileo Thermometer with real Temperature and Weather Data. Temperature Display, Windchill Temperature, Air Humidity, Wind Speed, Barometer. Displaying Weather Data:- Date + Time of the Weather Data (Greenwichtime+Time Zone)- Windchill Temperature and Humidity % - Wind Speed in kph or MPH- Airpressure in mb, hPa, Torr (mmHg), psi or inchHg- Displaying the Station Name or the City- Temperature in C or F (highest value in the Galileo Thermometer=actual Temperature)Settings:- Cities for 4-days-forecast- Temperature in C or F- Barometer in mb, hPa, Torr, psi, inchHg- Wind Speed in kph or MPHMore Features:- Data: Internet, online (a few bytes)- Map of the Location of the Weather Station- Button for updating data- Device does not turn off, while the program is running- At Ice (under 0C): Displaying crystals- At Rain: Water drops- At Snow: Animated snowfalls

  • size 4.2 MB
  • version 2.0

Jetting for Suzuki RM two strokes motocross, SX, MX or supercross, off-road race bikes - Setup carburetor without repair manual

Jetting for Suzuki RM is an application that will help you configure the carb of your 2-strokes Suzuki RM bike (RM60, RM65, RM80, RM85, RM100, RM125, RM250) to improve its performance. Using temperature, altitude, humidity, atmospheric pressure and oil-mix ratio, the app will show you a recommendation about jetting to your specific bike, so it can be usefull to get a spot-on configuration and adapt it to the weather changes. Suzuki RM models that are included:- RM 60: 2003 - 2004.- RM 65: 2003 - 2006.- RM 80: 1994 - 2001.- RM 85: 2001 - 2015.- RM 100: 2003 - 2005.- RM 125: 1994 - 2007.- RM 250: 1994 - 2010.

  • size 2.2 MB
  • version 1.2.1

Jetting for KTM SX, EXC, XC & MX 2T

This app provides, using temperature, altitude, humidity, atmospheric pressure and oil-mix ratio, a recommendation about the jetting configuration to use for KTM 2-strokes MX and enduro bikes (SX, SXS, EXC, XC and MXC models).In order to get the weather values, the application can use the location service (GPS or WiFi) to obtain the position and altitude, and the network connection to get the temperature, pressure and humidity from the nearest weather station. Nevertheless, the application can run without GPS, WiFi and internet connection, in this case, the user has to give the weather data. Valid for the following models from 2005 to 2017:- 65 SX (2010 to 2017)- 85 SX- 105 SX- 125 SX- 125 SXS- 125 EXC- 144 SX- 150 SX- 150 XC- 200 EXC- 200 XC- 250 SX- 250 SXS- 250 XC- 250 EXC- 300 EXC- 300 XC- 300 MXC

  • size 4.2 MB
  • version 1.6.2