Hobby Ino!

QR Code ReaderQRiPhoneiPadiPodQRQRQR Code ReaderQRQR QR SCANScanQR Code ReaderApp [email protected] @scanQR Code ReaderSCAN.MEQRQRhttp://scan.meQRWi-Fi QRWi-FiQR

• rating 4.625

This app allows you to easily test your projects that use the HM10 or HM11 Bluetooth to Serial transceiver module. Can be used with, for example, Arduinos and other microcontroller boards. Source code can be found on GitHub.

• size 17.7 MB

Wirelessly connect your iOS device to Adafruit Bluefruit LE modules for control & communication with your projects. Features: Send iOS sensor & GPS data wirelessly over Bluetooth LE (Continued use of GPS running in the background can dramatically decrease battery life) Control Pad for simple directional control of your projects Control Arduino Digital, Analog, & PWM pin input & output Send & receive messages via UART monitor in Hex or ASCII format Control NeoPixels individually with an interactive color picker Scan & list nearby Bluetooth LE peripherals with RSSI and Advertisement data Connect & List peripheral Services & Characteristics in Info mode Serial Plotter to plot numeric data graphically Multiple simultaneous connections (UART and Serial Plotter only) Update your Bluefruit device to the latest firmware version from within the app Use Apple Watch to control Bluefruit with Color Picker & Control PadLearn more about Adafruit Bluefruit LE at:http://www.adafruit.com/bluefruitle

• size 47.9 MB

Control Arduino, Raspberry Pi, ESP8266, ESP32, Particle Photon and Electron, and many other microcomputers with an iPhone? Building a smart home or robot? Happy Blynking

• size 31.8 MB

This app allows you to control the connected hardware devices. BLE (Bluetooth Low Energy) Supported by Innovative Experiment. Hardware Support:-Support connection with BLE-LINK Bluetooth 4.0.-Support connection with HM-10 BLE Bluetooth 4.0 Module (CC2540/CC2541 Serial Bluetooth).You can preview demos of the app is available at the link below.https://youtu.be/th8qyeigu4w

• size 2.2 MB

• version 1.0

Control all devices through the local network or 3G NetIO is a generic remote controller for your iPhone/iPad which simply sends and reads strings over a network socket. You can easily communicate with micro controllers connected to your LAN (for example AVR-Board, Arduino Board, reembox, raspberry pi, self made hardware) or with other computers. (Demo http://www.youtube.com/watch?v=uWm2Q_TL4HY )If there are any problems please write a mail

• size 4.8 MB

• version 2.1.5

HackerRemote is a Bluetooth 4.0 (BLE) remote app for your electronic projects, such as robots and copters. It can be used with arduino and a BLE to serial module, such as RedBearLab BLE Mini and DFRobot Bluno. And the app can also receive strings from BLE devices and display them on the screen.

• size 13.1 MB

• version 1.1

New LIVE graphs and controls EASY to setup ArduinoConnect is a custom iPad and iPhone application designed to connect your Arduino (and your Raspberry Pi with in-app purchase) to the external world. You can connect and control from your iPad / iPhone virtually anything you can connect up to your Arduino or Raspberry Pi. The major features of ArduinoConnect are:- Easy to setup control interfaces (all done on iPad / iPhone - no need for downloading or syncing)- Ten independent pages of displays available- Display text, meters, images all from your Arduino or Pi to your iPad / iPhone- Customizable Action Buttons allow the iPad / iPhone to control your Pi /Arduino- Auto refresh keeps things up to date- Raspberry Pi Interface available with In-App purchase- You can connect to multiple Arduinos on every page- Wide variety of different customizable controls on the iPad / iPhone- Open source customizable server for your Arduino written in C++- Open source customizable server for your Raspberry Pi written in Python- Two ways of Importing / Exporting for sharing configurationsThe major features of the ArduinoConnectServer are:- Full Open Source Code- Easily Modifiable by User- Full Documentation- Excellent Examples- Modular Architecture- Supports Webcams / i2c devices / custom hardware- Bi-Directional interface with the ArduinoConnect client software- Arduino Server runs on Ardunio Mega and above- Uses JSON for Arduino communication and XML for Raspberry Pi- Uses XML For Configuration Files

• size 20.0 MB

• version 3.18714172

This App allows you to easy control Arduino UNO/DUEMILANOVE Hardware Board via JBT24MPA/CA:FW:UART Bluetooth 4.0 BLE Module without any XCODE/IOS programming knowledge to make your own customized control App. Compatible with iPhone5,iPhone4s,iPad mini and New iPad. Continued use of Flash Light will can dramatically decrease battery life.App demo please refer to:http://www.youtube.com/watch?v=fe8fcblgla4

• size 12.5 MB

• version 3.0.11

New LIVE graphs and controls EASY to setup RasPiConnect is a custom iPad and iPhone application designed to connect your Raspberry Pi (and your Arduino with in-app purchase) to the external world. You can connect and control from your iPad / iPhone virtually anything you can connect up to your Raspberry Pi or Arduino. The major features of RasPiConnect are:- Easy to setup control interfaces (all done on iPad - no need for downloading or syncing)- Ten independent pages of displays available- Display text, meters, images all from your Pi or Arduino to your iPad / iPhone- Customizable Action Buttons allow the iPad / iPhone to control your Pi /Arduino- Auto refresh keeps things up to date- You can connect to multiple Pis on every page- Wide variety of different customizable controls on the iPad / iPhone- Open source customizable server for your Raspberry Pi written in Python- Open source customizable server for your Arduino written in C++- Works with any computer that supports Python (not just the Pi )- Two ways of Importing / Exporting for sharing configurationsThe major features of the RasPiConnectServer are:- Full Open Source Code- Easily Modifiable by User- Full Documentation- Excellent Examples- Modular Architecture- Supports Webcams / i2c devices / custom hardware- Bi-Directional interface with the RasPiConnect client software- Runs on Raspberry Pi or any OS or machine that supports Python- Arduino Server runs on Ardunio Mega and above- Uses XML for Communication and For Configuration Files

• size 20.5 MB

• version 3.18714172

Play Bluno is an app that provides extreme ease for DIYers,Arduino enthusiasts,and home automation zealots to do demonsrations and tests with Bluno controller board via BLE(Blutooth Low Energy) communication. Specially designed for the Arduino-based BLE hardwares, users can easily learn to control and interact with a variety of functions with their phone. Recommended to be used with BLUno board and Accessory board.

• size 3.5 MB

• version 1.01

RemoteXY is easy way to make and use a mobile graphical user interface for Arduino boards and other controllers. Using the editor of mobile graphical interfaces, located on the site http://remotexy.com , you can make your own unique graphical user interface and load it into the controller. The source code generator have support next controllers: - Arduino UNO, Arduino MEGA, Arduino Leonardo, Arduino Pro Mini, Arduino Nano, Arduino MICRO; - WeMos D1, WeMos D1 R2, WeMos D1 mini; - NodeMCU V2, NodeMCU V3; - The AirBoard;Supported comunication modules: - WiFi ESP8266; - Ethernet Shield W5100;Supported IDE: - Arduino IDE; - FLProg IDE;

• size 13.7 MB

• version 1.1.0

What is 1Sheeld?1Sheeld is a platform for Arduino that allows you to tap into your smartphones sensors and capabilities and lets you use them in your Arduino projects. Basically, It is a hardware shield that sits on top of your Arduino board and communicates over Bluetooth to this iOS app, to transfer data between it and your smartphone. If you have any problems, a suggestion, or just wanted to say hi, just drop us an email at info (AT) integreight (DOT) com and we will be very happy to answer.

• size 55.4 MB

• version 1.8.2

Bluno Term is a terminal of Bluno which has an on-board BLE chip: TI CC2540 of Arduino UNO development board. The app can connect to and communicate with Blunos Serial via BLE (Bluetooth 4.0). For more information about Bluno, please visit web page: http://www.dfrobot.com/wiki/index.php/Bluno_SKU:DFR0267

• size 6.2 MB

• version 2.0