PLEASE NOTE: This app requires a Geiger counter:ACHTUNG: Diese App erfordert einen Geigerzhler: ATTENTION: Cette application ncessite un compteur GeigerGeiger Bot is a companion app for Geiger counters, providing you with a toolkit for recording, mapping, analyzing, and sharing Geiger counter data. Whether you need a numeric display for an old analog counter, mapping, graphing and extensive logging for even a digital counter, or online automated data sharing via Cosm(Pachube), Geiger Bot can be of use. If you encounter any problems or Geiger Bot has issues adapting to your counter, please email me and Ill try to get a fix into the next release.


Similar Apps

Pocket Geiger Counter Pro
GameServer Remote Control

Geiger Bot alternatives

Teslameter 11 - Metal Detector

Teslameter 11 takes advantage of the built in magnetometer in your iPhone/iPad, allows you to monitor the strength of magnetic field all around. There are a range of real-life applications for this useful item, such as: metal detector, AC magnetic fields, or finding low-magnetic places for sleeping (especially for babies) and of course, why not fun as well?Features:- Display the raw 3 axes x, y and z magnetometer values and a nice analog meter to display the magnitude - Display the graphical history of magnitude (size, strength) of the magnetic field- Support multiple units: tesla and gauss- Record and export the data to email for further analysis- Define your own threshold alert with audible alarm when it encounters a field (metal, speakers, etc. )- Sensitivity customizable- Start or stop the teslameter at any time- Enable/disable auto-lock screen

  • rating 4.14754
  • size 20.3 MB


The official Safecast app brings our extensive dataset of radiation measurements to your mobile device, and provides a full toolset to help you perform measurements with your own instrument such as a Geiger or scintillation counter (not included). The app functions as a virtual geiger counter, allowing you to see your location on a map while displaying radiation readings that have been taken nearby. To contribute measurement data to Safecast from the app, create a free account at

  • size 199 MB


RadioactivityCounterThis application is a real working radioactivity counter without any extra hardware needed It will turn your phone into a Geiger Mller Counter to measure radioactivity after proper calibration. Attention after upgrading iOS to a higher iOS do the calibrate again, as camera data properties might have changed Disclaimer: The type of radiation picked up by the camera can be dangerous/detrimental to the users health as well as cause damage to the device. * = Attention some phone might not be compatible due the new version of iOS or missing features (gps precision using sim cards)- please try to use an older rev of the App which should be available according to my settings (1.3).

  • size 11.6 MB

Japan Radiation Watch

Displays the radiation present in the air from a location within Japan (Yokohama) with a large, easy to read display - including the amount in nanoGrays, and a gauge with clear safety and escalated zones. The reading is live - updated every hour. There is also a graphing option available which allows you to see a visual history of the radiation readings all the way back to 2012.Now also visible on your Apple Watch

  • size 24.5 MB


Note that application requires Do-Ra device connected to the smartphone using microphone input to measure radiation level and doze. For more information about Do-Ra project check Users manual commercial news channel about Do-Ra

  • size 3.5 MB

More Information About alternatives

Pocket Geiger Counter Pro

(You cannot measure the radiation only by using this application program)iPhone can be used as a radiation detector, as it is called Geiger counter, by connecting the voice output of the Pocket Geiger Counter with the microphone input. For more information about Pocket Geiger Counter, see http://www.radiation-watch.orgSpecificationsSensor: PIN photo diode x8 (reverse biased and shielded)Detectable radiations: Beta and Gamma radiationMeasurement range: 0.05uSv/h~10mSv/h (Calibrated using Cs-137), 0.01cpm~300000cpmMeasuring time: about 5 minutes at the dose rate of 0.05uSv/hEnergy response: :662keV~1333keVSoftware features- uSv/h and its counting error calculation- CPM calculation- Manual setting interface for time range and threshold *Pro version only- Oscilloscope *Pro version only- Detection log visualization *Pro version only- Circuit diagram *Pro version only- Save and log *Pro version only- Measurement data with location information sharing between users on the map *Pro version only Data sent by the application- Date and time- Position (latitude, longitude)- The value measurement (uSv/h, cpm)* The following information is not intended to send.- Personally identifiable information (such as device ID)The data is uploaded by the application is never present, be open to the public. The project is supported by volunteer engineers, designers and scientists.

  • size 1.3 MB
  • version 1.37

GameServer Remote Control

GSRC is a RCON and Query tool to help administrating gameservers or just watch server-infos. Click more for supported game infos Key Features:Manage ServersKick PlayersBan PlayersChange MapsCheck and Change RulesRcon-Console with logging function for many gamesChat-Console for source-engine gamesAutomatically download mappics for your servers from GSRC-ServerUpload your own mappics to GSRC server. So BEFORE you post a bad review please write us an email to help you, and if there is a bug we will fix it as soon as possible If you encounter bugs/crashes or have any problems please write a feedback on our support site or write an email to [email protected] to help us fixing bugs faster Please write us your favorite games and let us know your suggestions

  • rating 1.6
  • size 3.8 MB
  • version 3.4.3


RCBController has an interface of a gamepad, and if these buttons are pushed, it will transmit the following data by Bluetooth LE (BLE).When you use this App, I have not specified the BLE device for reception. If you want to use this App, please program your BLE device to be able to receive the data of BLE which this App has transmitted. FFF0 / FFF1 / FFF2 / FFF3SBDBT SBBLE, konashi (9600bps) FF00 / 3012 / 3013 / FFF3koshian (9600bps) / konashi2 (115200bps) 229BFF00-03FB-40DA-98A7-B0DEF65C2D4B 229B3012-03FB-40DA-98A7-B0DEF65C2D4B 229B3013-03FB-40DA-98A7-B0DEF65C2D4BRFduino 2220 / 2222 / 2221LightBlue Bean A495FF20-C5B1-4B44-B512-1370F02D74DE A495FF21-C5B1-4B44-B512-1370F02D74DE (Scratch1) A495FF22-C5B1-4B44-B512-1370F02D74DE (Scratch2) A495FF23-C5B1-4B44-B512-1370F02D74DE (Scratch3)FemtoduinoBLE 195AE58A-437A-489B-B0CD-B7C9C394BAE4 5FC569A0-74A9-4FA4-B8B7-8354C86E45A4 21819AB0-C937-4188- B0DB-B9621E1696CDBLESerial 569A1101-B87F-490C-92CB-11BA5EA5167C 569A2001-B87F-490C-92CB-11BA5EA5167C 569A2000-B87F-490C-92CB-11BA5EA5167C[Transmit data format]The 1 - 2nd byte: Button (Right buttons)UP: 0x0001DOWN: 0x0002RIGHT: 0x0004LEFT: 0x0008(Left buttons)Y button: 0x0010A button: 0x0020B button: 0x0040X button: 0x0100left center: 0x0080(Shift buttons)L1: 0x0200L2: 0x0400R1: 0x0800R2: 0x1000(Other)START: 0x0003SELECT: 0x000CThe 3 - 4th byte: Left analog StickLeft - Right: 1-255 (Neutral=128) Up - Down: 1-255 (Neutral=128)The 5 - 6th byte: Right analog StickLeft - Right: 1-255 (Neutral=128) Up - Down: 1-255 (Neutral=128)The 7 - 9th byte: AcceleratorX axis: 1-255 (Neutral=128) Y axis: 1-255 (Neutral=128)Z axis: 1-255 (Neutral=128)The 10th byte: Status information7 - 6th bit: Accelerator (0-3)5th bit: Left analog (0-1)4th bit: Right analog (0-1)3-1st bit: Device direction (1-4)[Support Home page][BLE module]I tested BLE modules.mbed HRM1017: LPC1768: Bot: http://www.rfduino.comSBDBT:[Sample Movies]

  • size 5.5 MB
  • version 1.4.0