The only one official EasyN IP camera app With this app you can remotely view and control your EasyN IP camera from your iPad, iPhone or iPod Touch. From wherever you are* You can use it for example for home security (is someone breaking into your home? NOTE THAT NOT ALL FEATURES WILL WORK WITH ALL CAMERA MODELS 3G or wireless network connection required, for use outside your home network youll need to setup portforwarding on your router, see the FAQ.Please note that Im an independent developer, I made this app commissioned by EasyN.

EasyN IP Control alternatives

CamOn for FOSCAM HEDEN

This application is intended to control and view video survey cameras Foscam VGA and HD H264 ( all models ) , HEDEN VisionCam (all models except HD) and compatible .APPLE WATCH COMPATIBLEAutomatic monitoring:- Enable and disable motion and noise detection on all cameras in a single step and by Apple Watch.- Activation and deactivation by geolocation (Possible synchronization between multiple iPhones).- Push and/or email notifications on alarm. Baby monitoring :- Nursery RhymesVido and management:- Live video and cameras remote control (including High Definition H264).- Listening to the monitored room.- Scan local network to find new cams and configure automatically IP address and port- Supports optical zoom for high-end cameras.- Rotating cameras by the finger swiping on the screen.- Live video thumbnail in the home screen.- Choose between cell list and Thumbnail Collection (1, 2 or 3 thumbnail per lines or column)- Full screen image in landscape mode.- Adaptation of the video bit rate according to the network.- Recording preferred positions with the possibility of patrolling between these points.- Positioning on work or rest position automatically (on detection activation or deactivation)- Video recording or snapshot of current visualization.- Pin code or touchId to access the app.- Ability to disable Auto Sleep for permanent display.- Etc etcThe application is maintained through regular updates each time with new features . Advanced live video and control functions are available to test for 2 weeks, then accessible via in-app purchase for the symbolic price .I remain very attentive to the users and if you have any question or any problem, rather than leaving a negative opinion on the Apple Store which will not help you, do not hesitate to contact meThanks in [email protected].

  • rating 3.5
  • size 36.1 MB

uApexisCam: 2way Audio & AV Record

uApexisCam allows you to remotely monitor multiple live audio and video feeds with an incredibly intuitive touch screen user interface for Apexis network camera. It not only gives the user many more options such as 2 way audio, video record, pinch to zoom, motion/face detection, retina graphics for the iPhone 4 and the new iPad and more, but enables to quickly and easily add new models right after users request through our open architecture software. If you have any questions or comments, or you would like to request that we support additional camera models, tap the Help button.

  • size 10.4 MB

uCamPro: IP Camera & Webcam Viewer

* 30% Off for A Limited Time Only uCamPro allows you to monitor multiple live video and audio feeds directly from network cameras (1000+ models of network cameras from 100+ manufacturers) and built-in/FireWire/USB webcams with top notch performance and speed. * Main Features Unlimited number of cameras can be configured Direct access to audio and video streams from cameras. If you have any questions or comments, tap the Help button.

  • rating 3.91111
  • size 38.7 MB

uFoscam: 2way Audio & AV Record

* 20% Off for A Limited Time Only uFoscam allows you to remotely monitor multiple live audio and video feeds with an incredibly intuitive touch screen user interface for Foscam camera. It not only gives the user all options for operation and administration, but enables to automatically record video/audio by in-app event detection feature over Wi-Fi coverage or even cellular networks. For more information, please see www.portforward.com or www.dyndns.orgIf you have any questions or comments, or you would like to request that we support additional camera models, tap the Help button.

  • rating 4.20833
  • size 38.9 MB

ipCam FC - IP camera surveillance

With ipCam FC you can control your IP cameras on the iPhone & iPad or make settings. Take access to your cameras over your home network or over the internet. Features (please note: not all functions are supported for each camera) iPad & iPhone version Real-time video stream Access over local network (LAN, WLAN) or over internet / DDNS (mobile data 3G, 4G) http or secure https connection to your camera (if supported by your camera) Control your cameras over 8 axes Presets, camera positions, load and save up to 16 presets Setting the speed for manual or automatic control (Pan-Tilt Speed) Auto patrol settings (horizontal, vertical, horizontal + vertival), setup the interval and rounds of each interval Manual patrol Pause, pausing the current video image Setup motion detection (internal, external): automatic email delivery, email management, setting the internal motion sensitivity, optical and acoustic alarm, activate FTP upload with setting the upload interval Option for automatic driving to a preset on alarm (only for standard MJPEG IP cameras) Option for automatic saving of images on alarm (only for standard MJPEG IP cameras) Schedule can be set (for standard MJPEG IP cameras) Optical zoom (only for compatible cameras), digital zoom (pinch to zoom) also for cameras without a optical zoom function Turn the iPhone for fullscreen mode, with fully control ability OSD menu turn on or off control also in fullscreen mode (landscape) Save, send and share snapshots Setup resolution, frames per second (fps), brightness and contrast Mirror videoimage horizontally or vertically, for cameras hang headover MultiView, watch 4 or 8 cameras simultaneously (4 = landscape, 8 = portrait), by scrolling you can see up to 96 cameras, tab on the camera to switch to control mode Sort the camera list and multiview Enable / disable cameras in multiview Alarm on motion detection in MultiView Switch on and off the LEDs for network activity or IR LEDs (if supported) Access or system logs data usage for each camera, traffic overall and last session, display data rate per second Add MJPEG or JPEG Stream (also webcams are supported) PIN code (password) Import/Export, backup over iTunes File Sharing Multilanguage, currently english, spanish and german, further languages coming soonMany ip camera models from the following manufacturers or brands are supported:7Links, ABUS, AGASIO, AirLink101, ALLNET, AMCREST, amegia, Apexis, Asoni, Astak, AVTECH, AXIS, CISCO, D-LINK, DBPOWER, Dericam, digicom, DIGITUS, dnt, EasyN, Edimax, ELRO, Encore, Esky, FreeTec, Floureon, Foscam, Grandstream, hama, Heden, RS7507H, HI3507, RS7507H, HIKVISION, HooToo, HUNT, INSTAR, Intellinet, INVID, IPS-IPSmart, iPUX, kingstar, international, LevelOne, Linksys, Loftek, LogiLink, LUPUS, Maginon, Marmitek, MEDION, Micronet, OptiCam, Panasonic, QNAP, SavitMicro, SC2000, SMAX, Somikon, SONY, Sricam, Storage-Options, sygonix, Technaxx, TENVIS, TP-LINK, Trek, TRENDnet, TriVision, wanscam, Wansview, WatchBot, velleman, Vivotek, Vonnic, Vstarcam, X10-Airsight, Y-camPlease visit our homepage, to check if your camera model supported by the app.http://www.appzer.de/ipcam_fc_en.htmlIf you have questions or trouble with the app, please write an email to our support: [email protected]

  • size 50.3 MB