Bullet Flight M!

Reloader VMD helps ammunition reloaders calculate appropriate powder charge weight thrown by volumetric powder measures. It supports Lee Auto Disk, Lee Micrometer Charge Bar and Lee Double Disk, Lee Perfect Powder Measure (PPM), RCBS Little Dandy, Shotgun Powder Bushings (Lee, MEC, Hornady, Ponsness/Warren)If you are reloading ammo you should consider Reloader VMD: Have you ever been confused by complicated math formulas and instructions in reloading equipment manuals? Have you had to run through a tedious trial and error process on setting up LEE Double Disk measure?If you answered YES to any of the questions above than Reloader VMD is for you Simply select you powder and desired charge and have Reloader VMD select an appropriate measure for you

• size 34.3 MB

Mil-Dot Ballistics combines fast range estimation with a full featured ballistics calculator thats simple to use. Real-time calculations provide instant range estimation and ballistics calculation to get you on target fast. Optics, and Vortex Optics.- Two modes of Range input: Calculate range from target size and sub tension - allows you to estimate range to targets at unknown distances and Direct range input for known distance targets- Real-time solution information- Extensive bullet / cartridge library includes American Eagle, Barnes, Black Hills, Federal Fiocchi, Fusion, Hornady, Lapua, Norma, Nosler, Remington, Sellier & Bellow, and Winchester.- Support for variable BC information - Ballistics chart (Range, Elevation, Windage, Velocity, Time Of Flight, Energy)- Ballistics graph (Elevation, Velocity, Energy)- Reticle Drop Chart- Adjusts for atmospheric conditions for current and zero conditions (Density Altitude or Altitude, Pressure, Temperature and Humidity)- Get accurate local pressure using the barometer in iPhone 6 / 6 Plus- Use GPS location to set current atmospheric conditions- Fast range estimation - Moving target lead calculation- Correction for coriolis effect- Correction for spin drift- Optimum point blank zero calculation- Point blank range calculation- Configurable windage / elevation hold display (mils, MOA, IPHY, clicks)- Target size presets- Second focal plane scope support - Fast windspeed / direction adjustment - Three ways to input line of sight angle (Angle in degrees, Cosine of angle, Automatic using device accelerometer)- Fast target speed adjustment - Target speed presets - Training mode (practice your range estimation skills)- Point of impact indicator - Bullet drop compensation display - Secondary solution info display for non-critical data - Create unlimited ballistics profiles - Multiple color schemes - Adjustable display brightness - Full Retina display support- Print range cards- More reticle designs coming soon, stay tuned

• rating 3.88889

• size 34.8 MB

This application measures the shortest (air) distance from a point A to a point B using GPS with maximum available accuracy in yards, meters, kilometers and miles. You simply reset the ruler at the point A, and then you watch the distance counters increasing as you move to the point B (as if you were using a real tape measure or a ruler).Primary use for approximate sizing / measuring of:- land, grounds, properties- real estate- golf course yardage- sport facilities and tracks- air distance- other outdoor measurementsThe application is intended for outdoor use only with location services enabled. Once reopened, the application continues the current measurement.

• rating 4.66667

• size 17.9 MB

The Bullseye Target Manager is the iPhone/iPad application for the Bullseye Camera System. The application allows you to see your shots from up to 1 mile away from the target via the wireless connection. The app provides the ability to see the last shot blink, mark shots, color shots, review shots, save/load sessions, measure groups, overlay grids and play head-to-head target games* *iPad required for target gaming mode.

• size 8.3 MB

iStrelok is a ballistic trajectory calculator. - 693 reticles supported Full list see here: http://istrelok.borisov.mobi - You can see holdovers on your reticle and scale holdovers to any magnification (if reticle is located in second focal plane).- Trajectory calibration (Truing) feature.- abitity to change target type and select from: Round target (you can change diameter), Old IPSC Target, IPSC Target, IPSC Universal Target, IPSC Mini Target, IPSC A4 Target, IPSC A Target, Target number 4. Field-proven accuracy since 2001.Supports imperial units (yards, feet, inches, etc).

• size 14.2 MB