ADC Utility!

System Status Lite is a lite version of System Status - the ultimate app for monitoring and optimizing your iPhone and iPad performance. The lite version monitors your devices basic parameters such as battery level, disk usage, CPU load and network connections. BATTERY MONITORING Graphical battery level display Battery state monitoring (discharging, charging, full)DISK MONITORING Used and free disk capacity monitoringCPU MONITORING CPU usage updated in real time Average load over the last 1, 5 and 15 minutesOPERATING SYSTEM System boot time and uptimeCELL & NETWORK MONITORING 3G and Wi-Fi network connection information IP address of the current connection Carrier information such as network provider and MCC/MNC codes External IP addressMORE Real time updates of the display once the monitored parameters change Copy/paste support Detailed help Regular updates, support page

• rating 4.62605

• size 9.6 MB

The SensorTag app and kit with 10 low power sensors. Connect your Bluetooth Smart or WiFi SensorTag and get your sensor data online in 3 minutes. It allows you to quickly test and develop web connected applications and easily change between wireless technologies.

• size 141 MB

The PhoneGap Developer app is a testing utility for web developers and designers using the PhoneGap framework. After installing the PhoneGap Developer app you will be able to connect to your PhoneGap desktop app to instantly view and test your work on the device.

Control Arduino, Raspberry Pi, ESP8266, ESP32, Particle Photon and Electron, and many other microcomputers with an iPhone? Building a smart home or robot? Happy Blynking

• size 31.8 MB

Bluetooth Smart Scanner is the fastest app to find all Bluetooth Low Energy (also known as Bluetooth 4.0 or Bluetooth Smart) devices around you. It shows detailed information that Bluetooth Low Energy devices advertise, including device name, signal strength (RSSI), supported services, battery level, etc. BLE devices can only be discovered when they are advertising.

• rating 3.90196

• size 2.4 MB

Terminal I/O Utility enables users to evaluate TelitsTerminal I/O-based module solutions. It demonstrates transparent UART data transfer via Terminal I/O profile.

• size 3.1 MB

• version 3.5

BLE OTA enables you to update the ZentriOS firmware running on Zentri AMS00x (Bobcat) Bluetooth Low Energy modules. Using an Over-the-Air (OTA) update method, the module can be updated to use the latest firmware, or a specific version. Firmware versions are documented online at https://docs.zentri.com/ble/cmd/latest/versionsPlease contact Zentri if you require custom features or firmware, https://zentri.com/contact-us

• size 1.0 MB

• version 1.0.3

The BlueFan app is for engineers to evaluate BlueFan Bluetooth Low Energy (BLE) modules connectivity with an iOS device. After pairing, BlueFan module sends simulated heart rate monitor data for displaying on the iOS device. BlueFan is a Series of Bluetooth Smart and Bluetooth Smart Ready modules for engineers to use as a base to develop consumer, industrial, or medical devices used with iOS devices.

• size 6.8 MB

• version 1.1

The BlueNor Mesh app is for engineers to evaluate BlueNor Bluetooth Low Energy (BLE) modules connectivity with an iOS device. BlueNor is a Series of Bluetooth Smart and Bluetooth Smart Ready modules for engineers to use as a base to develop consumer, industrial, or medical devices used with iOS devices.

• size 6.8 MB

• version 1.3

TorqView is a free iOS App that lets you view all the operating parameters of a Torqbyte CM5 or CM5-LT controller on your iPhone or iPad in real-time. Controller data is streamed wirelessly to your Apple device over a Bluetooth Low Energy connection provided by the CM5 or CM5-LT Bluetooth expansion module. Displayed controller parameters include:- Engine Speed- Turbocharger/Supercharger Boost- Main Output Mode- Main Pump Output Duty- Main Pump Output Current- Auxiliary Output Mode- Auxiliary Output Master- Auxiliary Pump Output Duty- Auxiliary Pump Output Current- General Purpose Output 1 (GPO 1) Mode- General Purpose Output 1 (GPO 1) Duty- General Purpose Output 2 (GPO 2) Mode- General Purpose Output 2 (GPO 2) Duty- Analog Input A Voltage- Analog Input B Voltage- General Purpose Input 1 (GPI 1) State- General Purpose Input 2 (GPI 2) State- CM5 or CM5-LT Firmware VersionThe TorqView iOS App supports automatic screen rotation and allows switching between day and night display modes that can be changed from a bright color scheme for daytime viewing and an inverted dark color scheme for nighttime viewing.

• size 12.8 MB

• version 1.0

FORScan Lite application was developed specially for a computer diagnostics of Ford, Mazda, Lincoln and Mercury vehicles. Requirements:- ELM327 WiFi or other ELM327 compatible WiFi adapter, or Kiwi 3 Bluetooth Low Energy- Vehicles other than Ford, Mazda, Lincoln, Mercury are not supportedFeatures:- Analyzing an on-board network configuration of the connected vehicle- Read and reset DTC for all modules- Read sensors and other data (PIDs) from all modulesAttention: tests, service and configuration and programming functions are not available in FORScan Lite.

• size 58.3 MB

• version 1.3.11

The Laird/LSR ModuleLink for BLE application delivers convenience and simplicity in developing with Bluetooth Smart modules from Laird and LSR. The app provides an interface for real-time interaction and testing of many of Laird/LSRs newest and most popular certified Bluetooth Smart modules, including the Laird BL652, LSR SaBLE-x, and the LSR TiWi-uB1.When utilized with the modules Development Kit hardware, the app provides the ability to wirelessly monitor pushbutton inputs, sensors, and battery level, while also controlling LED outputs on the kit. Summary of Module BLE Communication Capabilities:- Monitor temperature of the onboard temperature sensor- Monitor the status of the onboard pushbutton switches- Toggle the user defined LEDs on or off- Monitor battery voltage- Monitor RSSI of data transmission from the module to the mobile app- Track RF statistics, such as number of BLE packets sent and received- Transmit Virtual Serial Port data bi-directionally (Laird BL652 only)Product links:http://www.lairdtech.com/products/bl652-ble-modulehttp://www.lsr.com/embedded-wireless-modules/bluetooth-module/sable-x-ble-modulehttps://www.lsr.com/embedded-wireless-modules/bluetooth-module/tiwi-ub1

• size 63.1 MB

• version 8.0

OCEASOFT CobaltSetCobaltSet is a utility application that enables you to configure the settings on your new Cobalt module. Key features Bluetooth access right from your Apple iPhone High / low temperature settings Alert / alarm settingsGeneral requirements iPhone 5S with Bluetooth 4.0 or higher iOS 7 or higher Internet connection (optional) One or more Cobalt wireless tracking modules

• size 118 MB

• version 1.1.4

The Bluetooth Smart Sensor app is used to showcase the capabilities of the Microchips Bluetooth Low Energy (BLE) module with the sensor board. The BLE should be programmed with the appropriate BLE private service and characteristics to transfer sensor data and an auto-running script to capture sensor data from the sensors on the sensor board. The module can be simultaneously configured as an iBeacon and connectable sensor peripheral to enable auto-connect.

• size 12.9 MB

• version 1.0

Amiccom BLE,,BLEUart BaudRate. ASCIIHex, BLE BootLoader .SIGNAL Utility can test all of Bluetooth 4.0 (Bluetooth Low Energy) Device. Its support of read,write and notify control, and Hex & ASCII.SIGNAL Utility Key feature:1.Scan for peripherals2.Get Device Local name and mac address or UUID3.Register for Notification4.Write Characteristic in Hex or ASCII5.Module F/W Update6.Log program status7.Device information setting

• size 1.8 MB

• version 1.2