MyPi - Control your Raspberry Pi GPIO!

VNC Viewer from RealVNC gives you instant remote access to your Mac, Windows and Linux computers from anywhere in the world. You can view your computers desktop, and control its mouse and keyboard as though you were sitting down in front of it. Protected by UK patents 2481870, 2479756; US patent 8760366; EU patent 2652951.

• rating 4.66667

Call any URL with an appropriate sized button on any of your devices (iPhone, iPad or Apple Watch). The screens can be configured according to your needs using a json file via iTunes file sharing. Thank you in advance

• size 17.9 MB

HARDWARE REQUIRED FOR FULL FUNCTIONALITYLogiScope is a full functional 16 channel logic analyzer. Its capabilities include up to 100MSPS sampling rate, SPI, I2C, UART, and parallel decoding. LogiScope will allow you to trigger on the exact event you want to look at Hardware can be purchased from http://www.oscium.com and includes the following:-LogiScope Accessory-2x Harness with 0.100 connectors-18x SMD Grabbers (16 channels + 2 GND)Hardware is certified to work with the following devices: - iPad mini 3- iPad mini 2- iPad mini - iPad Air 2- iPad Air - iPad 4 - iPad 3 - iPad 2 - iPad - iPhone 6 Plus- iPhone 6- iPhone 5C - iPhone 5S - iPhone 5 - iPhone 4S - iPhone 4 - iPhone 3GS - iPod touch [3rd (32GB only), 4th and 5th generation)

• size 7.1 MB

SSH client designed for usability and performance. RELIABLE AND FAST- Hardware accelerated text rendering.- Robust terminal emulation based on the PuTTY engine.- Works great with programs such as screen and irssi.CONTROL WITH GESTURES- Default gestures optimized for irssi. You can try all features for free for a limited time.

• size 9.0 MB

Oscilloscope your phone, touch or tablet iMSO allows you to analyze 2 analog and up to 4 digital signals using the iMSO-204 mixed signal oscilloscope hardware. Although demo mode is available for free with this download, hardware must be purchased to fully enable the product. - Its the first mixed signal oscilloscope available in the app store (50MSPS / 5MHz) - Easiest, most intuitive scope youll ever use - Preferred scope for the next generation of inventors Software demo mode includes: - Simulated wave display (sine, square, sawtooth, and triangular) - Cursors w/ measurements - Direct signal measurements - Analog triggering - Run / Stop / Single mode Hardware mode includes: - Analog triggering - Digital triggering - Cursors w/ measurements - Direct signal measurements - 1x or 10x probe setting - Run / STOP / Single mode Hardware works with the following devices: - iPad mini 3- iPad mini 2- iPad mini - iPad Air 2- iPad Air - iPad 4 - iPad 3 - iPad 2 - iPad - iPhone 6 Plus- iPhone 6- iPhone 5C - iPhone 5S - iPhone 5 - iPhone 4S - iPhone 4 - iPhone 3GS - iPod touch [3rd (32GB only), 4th and 5th generation)

• size 13.9 MB

Current Features- Testing connection- Control all GPIO output- Support multi-connection- Support both 26-pins and 40-pins- Multi-Pi list (Save more than 1 Pi)- Maste panel- Auto-script without codingFuture Features- GPIO input reading- - GPIO- - 2640- PiPi- - - GPIO

• size 28.6 MB

• version 1.2.0

Use your iPhone, iPad or iPod touch as a wireless keyboard and trackpad for your Raspberry Pi This universal application lets you send keystrokes and mouse events to you Raspberry Pi computers over TCP/IP via a wired or wireless network. Remote Pi is ideal for making the best out of a Raspberry Pi in the living room, or office too. Visit http://remotepi.io for more information.

• rating 3.8

• size 4.8 MB

• version 1.2

Features:Control and read digital pins & read all analog pins in Arduino, with ability to change the name of each pin. Applications:- Smart Home.- Automation.- Arduino projects.- Hoppy projects.- Schools & university projects.- Remote control. Check this youtube to see in real world: - http://goo.gl/ZGKCJ2Requirements:- Arduino Leonardo or Mega or Uno or any compatible board.- Arduino Sketch(URL provided inside the app).

• size 11.2 MB

• version 2.1

AirLight is part of a custom made home-automation solution designed and constructed by Silicon Straits Saigon. It is based on Arduino Yun / Raspberry Pi and RF switches to control various devices in the same or across different home networks. For more information about the hardware, please contact us.

• size 2.4 MB

• version 1.2.0

PLANEX Cloud Pi is remote access app for the Rasberry Pi. Once any cameras, sensors, lights or output devices are connected to the Rasberry Pi, the Cloud Pi enable to control those devices from iPhone. Cloud Pi supports 5 port mappings (pt 80 is default).Raspberry Pi connected to internet and CloudPi card are required for the Cloud Pi.

• size 1.4 MB

• version 1.0.2

Control and monitor your home devices like lights, switches, fans, various sensors/meters like temperature, rainfall, wind, Ultraviolet (UV) radiation, electricity usage/production, gas consumption, water consumption and much more at your fingertips with the most coolest automation system Domoticz - Home Automation. The app automates every appliance at your home and you can control it through the mobile device from any place. If you have enjoyed any feature of the Domoticz - Home Automation app, do rate us on the app stores and share among your friends.

• size 174 MB

• version 1.05

Do you open your front door still with a key?Now you can operate your front door and everything connected to your home automation with your iPhone, secured by your fingerprint. Open your front door by pushing your finger to the fingerprint sensor of you iPhone. What are the requirements?Our App and a home automation system, that supports network commands (via TCP or HTTP) with a connection to the door.

• size 11.4 MB

• version 1.01

HOME AUTOMATION APP - Customize entire interface with guiDesigner (free) - Control as many systems as required (TCP/UDP)- Logic scripting via powerful JavaScript API- Made for integration professionals - Supports all iOS devices (iPads, iPhones, iPods) - Works with any control system, including our ownCommandFusion iViewer allows two way remote control of any hardware or software capable of TCP/IP or UDP communications, directly from your iPad, iPhone or iPod Touch. One of the many functions iViewer can be used for is home automation. Show temperatures, volume levels, light levels, etc, from any Ethernet system, right on your iPhone, no control system required For the professionals, the entire interface and communication engine is scriptable via JavaScript using our API (http://www.commandfusion.com/docs/scripting)Visit www.commandfusion.com for more information.

• rating 3.6

• size 23.6 MB

• version 4.0.357

Features:- Best in class Ethernet shield controller.- Read & write digital pins.- Read & write PWM pins.- Read analog pins. - New and easy user interface.- Remember last status of the pins.- Change the mode of the pins (Output, PWM or Input).- Automatic connect to Arduino.- Rename the label of each pin. Requirements:- Any of Arduino (Uno, Mega, Leonardo) - Ethernet shield.- Arduino sketch(URL provided inside the app).Check this youtube to see in real world: - http://goo.gl/ZGKCJ2

• size 9.7 MB

• version 2

Controls all those DIY Electronics projects from one easy app - even use your voice There are numerous devices available that can be controlled with simple HTTP commands via APIs, such as home automation, cameras, thermostats, even connected toys. A simple application that makes it easier to manage and control the connected world around you is needed. * IP Camera Viewing

• size 31.8 MB

• version 1.5