Kasa for Mobile!

LiftMasters MyQ-enabled products and MyQ app allow you to easily open, close or check the status of your garage door, commercial door, gate or MyQ home lighting from anywhere with your smartphone or tablet. Get peace of mind knowing your main access point to your home or business is secure. LiftMaster the Worlds #1 Professionally Installed Garage Door Opener.

• rating 5.0

Wink is the quick and simple way to connect you and your home. The Wink app brings together hundreds of smart products including lights, locks, sensors, thermostats, and more across dozens of the best brands, so you can control them from anywhere. Talk to a real human at 844-WINK-APP or [email protected].

• rating 4.0

• size 153 MB

The Honeywell Total Connect Comfort app allows users to remotely monitor and manage their heating and cooling system at anytime, from anywhere. Honeywells Total Connect Comfort works with Honeywell Wi-Fi Thermostats and with Honeywell Redlink Comfort Systems when used in conjunction with Honeywells Internet Gateway. With the Honeywell Total Connect Comfort app users can:- View and change the schedule (for thermostats that support this feature)- Utilize the Demo Mode before purchasing a thermostat- View and change heating and cooling system settings- View and set the indoor temperature- View and change system fan (for thermostats that support this feature)- View and change humidifier and dehumidifier settings (for thermostats that support this feature)- View 5-Day weather forecast- View outdoor temperature and humidity (when used with an outdoor sensor)- Access multiple smart thermostats- Access multiple locations if more than one system is registered- View thermostat alerts such as high or low temperature- Automatically upgrade to new features once they become availableWhether a homeowner, business owner or both users will find comfort in Total Connect Comfort

• rating 4.52329

• size 22.4 MB

Rule your roost with Yonomi. Get all of your favorite connected home devices to play together like Sonos speakers, Philips Hue lights, Amazon Echo, Nest products, and Schlage smart locks with the free Yonomi app. See the latest list of devices that play well with Yonomi and learn more at: www.yonomi.co/supported-devices/

• rating 4.36842

• size 44.1 MB

Chamberlains MyQ-enabled products and MyQ app allow you to easily open, close or check the status of your garage door or MyQ home lighting from anywhere with your smartphone or tablet. Get peace of mind knowing your main access point to your home or business is secure. *Feature may not be available with all products.

• rating 4.83333

Utilizing the hardware and software applications, the HAI Home Theater Extender 2 (HTX2) is a stand-alone solution for control of A/V devices. Users can control their home theater equipment from an iPhone, iPad, or iPod Touch using the HAI Snap-Link Mobile for iPhone app, using only an HAI HTX2 Home Theatre Extender.

• size 0.8 MB

• version 1.0

Nuimo is a controller for smart home devices including your Sonos speakers, Raumfeld speakers, Philips Hue light bulbs, LIFX light bulbs and more. The Nuimo app is a companion to Nuimo hardware to setup your Nuimo, configure specific devices and add new devices.

• size 69.3 MB

• version 1.7.5

TP-Link Tether provides the easiest way to access and manage your TP-Link Router/ xDSL Router/ Range Extender with your mobile devices. From quick setup to parental controls, Tether provides a simple, intuitive user interface to see your device status, online client devices and their privileges.- Setup SSID, password and Internet or VDSL/ADSL settings of your devices- Block unauthorized users who are accessing your devices- Manage permissions of client devices- Parental control function with schedule and URL-based Internet access management- Find the best location to place your range extender- Automatically turn off the LEDs at specific time- Manage most of TP-Link devices simultaneouslyCompatible Routers (listed hardware versions and above)AD7200 V1Archer C5400 V1Archer C3200 V1Archer C3150 V1Archer C2600 V1Archer C2300 V1Archer A2300 V1Archer C1900 V1Archer C9 V1Archer C8 V1Archer C7 V2 Archer C5 V2Archer C1200 V1Archer C60 V1Archer C59 V1Archer C58 V1Archer C55 V1Archer C50 V1Archer C2 V1Archer C900 V1Archer C25 V1Archer C20 V1 Archer C20i V1TL-WDR4300 V1 TL-WDR3600 V1TL-WDR3500 V1TL-WR1045ND V2TL-WR1043ND V3TL-WR1043N V5TL-WR949N V5TL-WR945N V1TL-WR942N V1TL-WR941ND V5TL-WR940N V2TL-WR849N V4TL-WR845N V1TL-WR843N V4TL-WR842N V3TL-WR841ND V9TL-WR841N V9 TL-WR840N V2TL-WR749N V6TL-WR741ND V5TL-WR740N V5TL-WR941HP V1TL-WR841HP V2Compatible xDSL Routers (listed hardware versions and above)Archer VR2800v V1Archer VR2800 V1Archer VR2600v V1Archer VR2600 V1Archer VR900v V1Archer VR900 V1Archer VR600v V1Archer VR600 V1Archer VR400v V1Archer VR400 V1Archer VR200v V1Archer VR200 V1Archer D9 V1Archer D7 V1Archer D5 V1Archer D2 V1Archer D20 V1TD-W9977 V1Compatible Range Extenders (listed hardware versions and above)RE650 V1RE590T V1RE580D V1RE500 V1RE450 V1RE380D V1RE355 V1RE350 V1RE305 V1TL-WA860RE V2TL-WA855RE V1TL-WA854RE V2TL-WA850RE V2TL-WA830RE V3TL-WA820RE V1Compatible Cable Modem Routers (listed hardware versions and above)Archer CR1900 V1Compatible LTE Gateways (listed hardware versions and above)Archer MR200 V2*To learn how to find the hardware version of your device, go to http://www.tp-link.com/faq-46.htmlMore devices supported by Tether are coming soon Important Notes Upgrade firmware is required. Go to the download page to choose the correct version and download the latest firmware: http://www.tp-link.com/support.html TP-Link Tether does not work when connected to guest network For any issue, please contact http://www.tp-link.com/support.html

• rating 4.14286

• size 45.6 MB

• version 2.12.3

e-Home is a software for the iOS and a native application that allows you to fit your lifestyle and to seamlessly control all aspects of your property, including lighting, climate, appliances, curtains and blinds, multi-room audio/video, security, digital surveillance, entertainment and energy saving anywhere in the world. Important: Requires an activated xDSL account and Wi-Fi router to connect your e-Home hardware. Applicable with mobile devices (Smart Phone & Tablet).

• size 7.6 MB

• version 2.1.01

With ipCam FC you can control your IP cameras on the iPhone & iPad or make settings. Take access to your cameras over your home network or over the internet. Features (please note: not all functions are supported for each camera) iPad & iPhone version Real-time video stream Access over local network (LAN, WLAN) or over internet / DDNS (mobile data 3G, 4G) http or secure https connection to your camera (if supported by your camera) Control your cameras over 8 axes Presets, camera positions, load and save up to 16 presets Setting the speed for manual or automatic control (Pan-Tilt Speed) Auto patrol settings (horizontal, vertical, horizontal + vertival), setup the interval and rounds of each interval Manual patrol Pause, pausing the current video image Setup motion detection (internal, external): automatic email delivery, email management, setting the internal motion sensitivity, optical and acoustic alarm, activate FTP upload with setting the upload interval Option for automatic driving to a preset on alarm (only for standard MJPEG IP cameras) Option for automatic saving of images on alarm (only for standard MJPEG IP cameras) Schedule can be set (for standard MJPEG IP cameras) Optical zoom (only for compatible cameras), digital zoom (pinch to zoom) also for cameras without a optical zoom function Turn the iPhone for fullscreen mode, with fully control ability OSD menu turn on or off control also in fullscreen mode (landscape) Save, send and share snapshots Setup resolution, frames per second (fps), brightness and contrast Mirror videoimage horizontally or vertically, for cameras hang headover MultiView, watch 4 or 8 cameras simultaneously (4 = landscape, 8 = portrait), by scrolling you can see up to 96 cameras, tab on the camera to switch to control mode Sort the camera list and multiview Enable / disable cameras in multiview Alarm on motion detection in MultiView Switch on and off the LEDs for network activity or IR LEDs (if supported) Access or system logs data usage for each camera, traffic overall and last session, display data rate per second Add MJPEG or JPEG Stream (also webcams are supported) PIN code (password) Import/Export, backup over iTunes File Sharing Multilanguage, currently english, spanish and german, further languages coming soonMany ip camera models from the following manufacturers or brands are supported:7Links, ABUS, AGASIO, AirLink101, ALLNET, AMCREST, amegia, Apexis, Asoni, Astak, AVTECH, AXIS, CISCO, D-LINK, DBPOWER, Dericam, digicom, DIGITUS, dnt, EasyN, Edimax, ELRO, Encore, Esky, FreeTec, Floureon, Foscam, Grandstream, hama, Heden, RS7507H, HI3507, RS7507H, HIKVISION, HooToo, HUNT, INSTAR, Intellinet, INVID, IPS-IPSmart, iPUX, kingstar, international, LevelOne, Linksys, Loftek, LogiLink, LUPUS, Maginon, Marmitek, MEDION, Micronet, OptiCam, Panasonic, QNAP, SavitMicro, SC2000, SMAX, Somikon, SONY, Sricam, Storage-Options, sygonix, Technaxx, TENVIS, TP-LINK, Trek, TRENDnet, TriVision, wanscam, Wansview, WatchBot, velleman, Vivotek, Vonnic, Vstarcam, X10-Airsight, Y-camPlease visit our homepage, to check if your camera model supported by the app.http://www.appzer.de/ipcam_fc_en.htmlIf you have questions or trouble with the app, please write an email to our support: [email protected]

• size 50.3 MB

• version 1.26

eKeypad transforms your iOS device into a mobile controller for your Universal Devices ISY-99i, ISY-994i and ISY-994i Z automation controller. It enables you to easily access and control your system at home or while on the go. Unlimited screens allow you the flexibility to create the interface you want Equipment supported by eKeypad ISY (does not include add-on modules):Automation Systems: Universal Devices ISY-99i, Universal Devices ISY-994i, Universal Devices ISY-944i ZeKeypad Platform Features: - No 3rd party servers or services required- No additional fees or services are required - License supports all devices: iPhone, iTouch and iPad- Universal application optimized for all platforms- Configure any combination of supported equipment- Both dedicated or consolidated modes for multiple systems - Direct connections made to all devices to improve reliability- Security features to safeguard your system data and access- Configuration backup, restore and sharing via Wifi and email- Secure access for Cellular and even faster access via Wifi - Advanced management features for professional installers Optional features:- Custom screens via Blueprint module on the iPad- Co-branding to customize the look of the GUI- Elk alarm and automation controller support- Ness alarm and automation controller support- Multi-system Module for control of unlimited systems- IP Camera, DVR and NVR viewing and PTZ control- Whole house energy monitoring statusSupported equipment through add-on modules:Alarm Systems: Elk M1, Elk EZ8 and Ness M1Automation Systems: Elk M1, Elk EZ8 and Ness M1Lighting Technologies:INSTEON, X-10, Z-Wave, UPB, ViziaRF, Clipsal, ONQ-ALC, Centralite, Radio RA, Radio RA2, Zigbee and C-Bus Thermostats: Venstar, RCS, HAI, all Z-wave thermostats and Aprilaire IP Video Cameras Devices: Yoko Tech, Night Owl, Averfocus, HAI, Axis, Mobotix, Ness, Razberi Technologies, GrandStream, Sony, Dedicated Micros, IQinVision, Visualint, TRENDnet, Vitek, Wansview, ACTi, Channel Vision, Panasonic, Linksys, Level One, Sharx Security, Samsung, Wirepath, NetMedia, Asoni, D-Link, Wowwee, Y-Cam, GVI Security, Hunt, VisionTech, Toshiba, Bosch, Ubiquiti, Canon, Digital Watchdog, GeoVision, SMARTHOME, Foscam, Basler, Brickcom, Dahua, Vivotek, Etrovision, EverFocus, Hikvision, IC Realtime, Arecont, LTS, Network DVRs and NVRs: Digital Watchdog, IC Realtime, Visualint, LTS, Razberi Technologies, Ness, Everfocus, Dedicated Micros, Wirepath, GVI Security, Hikvision, Night Owl and Yoko Tech.

• size 67.3 MB

• version 3.0.42